Maxi-Floc PlusLLCCL
General Instructions 1. Calculate the volume of Maxi-Floc Plus required from the table below. 2. Pre-dilute the product in a clean plastic container. 3. Set the pool filter to RE-CIRCULATE. Where this setting is not available, remove the filter cartridges or grids before operating the filter. 4. Adjust the pH to 7.8. 5. Evenly distribute around the pool with the pump and filter running. 6. Run the pump for 1 to 2 hours and turn off. 7. Leave the pool for all residue to settle, usually within six hours. 8. Vacuum to waste. 9. Replace filter cartridges or grids, where necessary. 10. Resume normal filtration and correctly balance the pool water.
Dose Rates
Maxi-Floc Plus is a fast-acting heavy duty flocculant that restores clarity to the cloudiest pools. Maxi-Floc Plus leaves no messy residue, can be used in all pool types and is compatible with all known pool treatments.
POOL VOLUME:
DOSE:
GALLONS: 5,500 11,000 16,500
LITRES: 25,000 50,000 75,000
500ml 1000ml 1250ml
Made with FlippingBook Digital Publishing Software