No More MetalTLLL
General Instructions Stain Treatment & Prevention 1. Water must be correctly balanced. Unbalanced water is the cause of most metal staining. 2. Ensure the pump and filter are running as normal. 3. Follow the dose rate below and add the required dose to the pool water. Allow pool water to filter for a minimum of 12 hours after treatment. 4. Use a double dose for severe staining. 5. Continued use of this product helps prevent staining from returning.IFRSTIF initial fill of New Pools Mix 50ml in a clean plastic bucket of water and add to the pool for every 5,000 litres of pool water. Repeat this procedure as the pool is filling. Dose rates stain treatment & Prevention - 500mls per 50,000 litres (11,000 gallons) of pool water. initial fill of New Pools – 50ml per 5,000 litres (1,100 gallons) of pool water. No More Metal is a superior metal sequestriant designed to remove dissolved metals from pools, hot tubs and spas. It MUST be used for all stain removal treatments. Most stains are the result of incorrectly balanced water.
Made with FlippingBook Digital Publishing Software