Filter Cleaner & DegreaserTLLL
General Instructions SAND FILTERS: 1. Turn off the pump and filter and block off all pool return lines. 2. Undo the filter cover. 3. Mix 1 litre of product to 10 litres of cold water, in a suitable clean plastic bucket, and pour directly into the filter housing. DO NOT ADD TO THE POOL!! 4. Allow to stand for 24 hours. 5. After 24 hours’ backwash filter thoroughly and follow up with the “RINSE” cycle (if available) for ten seconds. 6. Resume normal filter operation. CARTRIDGE & DIATOMACEOUS EARTH FILTERS: 1. Dismantle filter and hose elements to remove all surface debris. 2. Add Filter Cleaner & Degreaser to cold water in a suitable clean plastic container. The dilution rate is 1 part product to 50 parts water. 3. Place the filter elements into the diluted solution. 4. Allow to soak for 24 hours. 5. Rinse thoroughly and reassemble filter, and resume normal filtration.
Filter Cleaner & Degreaser is a superior filter cleaner which can be used on all filters types including sand, cartridge and DE filters in swimming pools. Our unique formula effectively breaks down calcium scale and body fats, enabling the filter to work at maximum efficiency.
Made with FlippingBook Digital Publishing Software