SLATTED COVER CLEANER
generAl instructions
1. Wear protective clothing including goggles, gloves and a respiratory mask when using this product . 2. Predilute the product as necessary in clean plastic container following the dose rates below . 3. Apply the resultant solution to the cover using a suitable brush, ensuring maximum coverage of the affected areas. 4. Leave the product on the cover/surround for a maximum of 10 minutes. For older scale deposits further brushing may be required. 5. Thoroughly rinse the surface with freshwater post treatment.NREEERNOOSTENOLGEDRaGLLONSLITRESOOLOLUEDOSE Please note the following: The product is acidic therefore post treatment always check the pool water balance and adjust if necessary. Any other pool fabrics that are sensitive to acid, such as marble, chrome, stainless steel, aluminium and enamel should be covered during the application, cleaning, and rinse phases above. This will protect them from any splashes that may occur.
DOSE RATE
1-part product to 10 parts water light Scale deposits:
heavy Scale deposits:
1-part product to 3 parts water
Slatted Cover Cleaner has been specifically formulated for the quick and effective removal of calcium scale and staining from slatted pool covers and swimming pool surrounds.TLLCCLaamaGaI
Note: To ensure that this product is compatible with the surface it is recommended that you clean a small test area initially before proceeding with the whole surface.
Made with FlippingBook Digital Publishing Software