Knock-Out Algaecide
General Instructions 1. For best results adjust pH to 6.8-7.0. 2. Turn off the pump and filter prior to adding Knock-Out Algaecide. 3. Pour the required dose (use table below) near the algae. The water may foam initially. Brushing may be required for stubborn areas of algal growth. 4. After 2 hours turn on the pump and filter. 5. Because the dead algae are collected in the filter, a backwash will be necessary.NREEERNOOSTENOLGE Please note: For perfect pool water, it is recommended that Knock-Out Algaecide is used in conjunction with our phosphate removal products, either Lo-Chlor Starver® or Starver® X. Removing phosphates, prior to adding Knock- Out Algaecide improves product efficiency.
dose rAtes
POOL VOLUME:
DOSE:
MAINTENANCE: 100ml 300ml 600ml 900ml
GALLONS: 2,200 6,600 13,200 19,800A
LITRES: 10,000 30,000 60,000 90,000
INITIAL: 500ml 1500ml 3000ml 4500ml
Knock-Out Algaecide is a dual action formulation. It destructs the algae cell and its high foaming properties assists in removing the most stubborn forms of algae. This product is ideal for pools run on Salt Chlorinators and Ionisers.TLLCCL
Use algaecides safely. always read the label and product information before use.DRa
Made with FlippingBook Digital Publishing Software