Winteriser Algaecide
General Instructions 1. Prior to adding Winteriser Algaecide ensure that your pool is free from algae and debris. Clean the pool thoroughly, brush walls and floor and vacuum to waste. 2. Adjust the pH to 7.5 – 7.8. 3. Superchlorinate the pool using a registered, compatible sanitiser. 4. Add the required dose (use table below) near the pool inlets. 5. Run the pump and filter for a minimum of 6-8 hours to ensure maximum coverage around the pool.NREEERNOOSTENOLGEDRa Please note: For additional winter protection, we recommend using Lo-Chlor Starver® X (phosphate remover) after superchlorination. This will ensure that all phosphate has been removed from your water prior to adding Winteriser Algaecide, prolonging the effectiveness of the treatment.
dose rAtes 5 litres treats up to 54,000 litres.
POOL VOLUME:
DOSE:
LITRES: 25,000 50,000 75,000
GALLONS: 5,500 11,000 16,500
2315ml 4630ml 6945ml
Winteriser Algaecide is a Copper-Free, Long Life formula designed specifically for winterising a pool when de-commissioning at the end of the season. Winteriser Algaecide is suitable for all pool types and is compatible with all recognised sanitisers, and salt chlorinators.TLLCCL
Use algaecides safely. Always read the label and product information before use.
Made with FlippingBook Digital Publishing Software