Beall - Operations Manual - Pneumatic Tank Trailers

27 SAFE COUPLING PROCEDURE

11. Get out of the tractor and visually inspect that the locks are closed.

If you do not obtain a proper couple, repeat

wheel that fails to operate properly.

12. Raise the landing gear, stiff legs, or other trailer support. 13. Re-check the brake lines and power cord. 14. Remove wheel chocks and continue with pre-trip inspection.

1.2 TRUCK TO PULL TRAILER -OR- SEMI TRAILER TO PULL TRAILER. When coupling your truck or semi trailer to a pull trailer, refer to the diagram below for information on operating the coupler.

www.

.com

Made with FlippingBook Annual report maker