SAFETY SUMMARY
7
4. Before operating this equipment, every operator must read and understand this manual and the safety signs, and instructions contained therein.
is to obtain a translation of these instructions prior to allowing the person to operate the equipment.
Operators should become familiar with all the equipment functions and
practice the operation on an unladen unit. This familiarization should be performed with proper supervision in an approved site or yard. 5. Any persons who are to perform service or repair functions on the equipment covered by this manual, should be properly instructed and warned prior to beginning work. Each person must read and understand this manual and understand all notices, warnings, and general safety practices prior to maintenance or operation. 6. Maintenance should be performed within the guidelines set forth by the manufacture of that parts, assembly, or equipment. 7. Decals, signs, and operator manuals should be maintained so they can be read and understood by any person(s) that may be around or operating equipment. If a replacement needs to be obtained please call the Beall factory of origin, found on the Beall VIN or Serial Plate.
Do not remove or modify any of the original equipment without prior authorization from Beall. Doing so may void the warranty and endanger lives.
Before performing any maintenance or repair work requiring raising of vehicle, ensure vehicle is properly
not rely on jacks alone for support of vehicle.
Safety glasses and necessary personal protective equipment (PPE) should be used at all times when maintaining this equipment.
space that should not be entered without proper training and
www.
.com
Made with FlippingBook Annual report maker