MODEL
AF9
AF10
AF11
COMBINE CLASS SIZE
CLASS 9
CLASS 10+
ENGINE Type
Case IH - FPT
Displacement
12.9 L (787 cu. in.)
15.9 L (970 cu. in.)
Horsepower / Small Grains Rated (Peek) Horsepower / Corn and Beans Rated (Peek) Rated Engine Speed / Reduced Low Idle Speed
578 HP (425 kW) / 634 HP (466 kW) 544 HP (400 kW) / 634 HP (466 kW)
710 HP (522 kW) / 775 HP (570 kW) 666 HP (490 kW) / 775 HP (570 kW)
1900 rpm / 800 rpm
Fuel Tank / DEF Tank Capacity
343 Gal (1300L) / 163L
396 Gal (1 500 L) / 163L
Batteries / Alternator
3 × 12 V (99 A.h) / 240 A
FEEDER Feeder Width
56 in. (1 430 mm)
Feeder Length (with Rock Trap/SFS) Feeder Drive Type / Reverser System Head Lift Cylinders (Standard / Optional) Lift Capacity (Standard / Optional)
85 in. (2 156 mm)
84 in. (2 146 mm)
Power-Plus CVT Drive / Power-Plus CVT hydraulic
3.7 in. (95 mm) / 4.0 in. (110 mm)
12,100 lb. (5 500 kg) / 15,000 lb. (6 800 kg)
Lateral Tilt Range
+⁄− 5 degrees
Fore/Aft Faceplate Tilt
16 degrees
Stone Trap/Synchronized Feed System (SFS)
Staggered Straight Serrated with enhanced rock catching
Staggered Straight Serrated with V-Splitter w/ enhanced rock catching
THRESHING/SEPARATING Threshing Type Rotor Drive Type / Rotor Speeds Rotor Diameter / Rotor Length Number of Concave/Modules
Rotary - Single Rotor
Rotary - Dual Rotor
Power-Plus CVT Drive / 235-1,180 rpm 30 in. (762 mm) / 144.5 in. (3 670 mm)
Power-Plus CVT Drive / 285-1,370 rpm
Qty. 2 - 24 in. (610 mm) / 141.7 in. (3 600 mm)
2 pair (2 LH and 2 RH) 4 pairs (4 LH and 4 RH) 180 degree / 180 degree
3 per rotor (6 total) 6 per rotor (12 total) 140 degree / 140 degree
Number of Separating Grates/Modules Threshing / Separating Area Wrap Discharge Beater (Standard / Optional)
MagnaCut Integral Chopper / Beater with MagnaChop High Hood Mounted Chopper
Auger Bed / Active Grain Pan
Grain Pan with Cross-Flow / Side Shake
Grain Loss Monitor
Standard with Left Hand and Right Hand Sensors
Cage Vanes
In-cab adjustable
CROSS-FLOW PLUS CLEANING SYSTEM Cleaning System Width Total Sieve Area / Sieve Pressure Sensors
70.5 in. (1 790 mm)
13,578 sq. in. (8.7 m2) / 4
Fixed or Self-leveling Cleaning System
Cross-Flow Plus (side-shake cleaning system); grain pan independent from shoe
Cleaning Capability Slope Sieve Louver Adjustment
up to 25% (13 degrees)
In-cab
Cleaning Fan Type (Drive) / Speed Range / Diameter
Cross-Flow fan (hydraulic) / 300–1150 rpm (+/- 50 rpm w/ AutoFan) / 17 in. (432 mm)
CONVEYING AND STORAGE Tailings Elevator
Qty. 1 Inclined Auger with Rethresher
Clean Grain Augers
Qty. 2
Clean Grain Elevator (Width × Height / Capacity) Grain Tank Capacity (Standard/Optional)
11.8 in. × 17.8 in. (300mm 451mm) / Standard- 8,000 bu/hr (Optional 10,000 bu/hr)
455 bu. (16,000L)/567 bu.(20,000L)
Unloading Auger Length
37 ft. 8 in. (11.5 m) (up to 61 ft./45 ft. Controlled Traffic)
Unloading Rate (Standard / Optional) DIMENSIONS Wheel Base - 2WD Axle / Pra Opt
4.5 bu/sec / N/A
4.5 bu/sec / 6.0 bu/sec
159.2 in. (4 044 mm)
Width*
155.43 in. (3 948 mm) (VF900/65R46) on 30" row) Minimum Weight 2WD** / Typical 2WD† / Typical 4WD†† 47,051 lb. (21 342 kg) / 52,139 lb. (23 650 kg) / 53,213 lb. (24 137 kg) 50,757 lb. (23 023 kg) / 56,238 lb. (25 509 kg) / 57,311 lb. (25 996 kg) 53,052 lb. (24 064 kg) / 58,526 lb. (26 547 kg) / 59,601 lb. (27 035 kg) Transport Height 156.7 in. (3980 mm) TECHNOLOGY FieldOps AccuSync, AccuGuide, Yield and Moisture Monitoring, Remote Display Viewing, 2-Way File Transfer, AFS1 Correction Signal (AFS3 Correction Signal Optional) Combine Automation Harvest Command, Radar Spread Automation, Grain Cameras * Single Tires with 120-in. Tread ** Single Drive Tires, AF - HHMC † Dual Drive Tires, AF- HHMC, operator and fuel full †† 800 Duals Drive Tires, AF - HHMC w/ operator and full of fuel
SAFETY NEVER HURTS! ™ Always read the Operators Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs, and use any safety features provided. CNH Industrial America LLC reserves the right to make improvements in design and changes in specifications at any time without notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions and illustrative material herein are as accurate as known at time of publication, but are subject to change without notice. Availability of some models and equipment builds varies according to the country in which the equipment is used. ©2024 CNH Industrial America LLC. All rights reserved. Case IH is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH Industrial America LLC, are the property of those respective companies. Printed in U.S.A. www.caseih.com CIH24081501
Made with FlippingBook - professional solution for displaying marketing and sales documents online