MUD Quick Change Systems

AF 102

Quick Coupler Locking KO Rod System

This knockout rod assembly is recommended for use with MUD® standard mold base adapter frame systems. It permits the molding machine’s hydraulic knockout system to operate at its maximum stroke. The KO system is designed with three push points and one pull back. The A & B rods, supplied extra long for finishing to precise length, are threaded into the mold’s

ejector plate flush with the back of the ear plate. The center rod locks the ejector plate to the special knockout rod installed on the machine’s hydraulic knockout plates. Two rods, threaded for adjusting to proper length, are also installed on the machine’s knockout plate flush with the inside surface of the adapter frame’s rear clamp plate.

Quick Coupler Locking Knockout Rod Assembly and Rods ITEM NO. DESCRIPTION PLKA192

Quick Coupler K.O. Assy.

Knockout rod assembly (1 required) Mold knockout locking rod (1 required)

A – X

MLKS193 PKR194 MKS195

Push rods (2 required)

Rest Buttons Rest Buttons

Mold Base K.O. Locking Rod

Knockout spacer rod (2 required)

Bottom Clamp Plate

B – X

Ear Plate Adapter Assy


Mold Base K.O. Spacer Rod

Ø 1.00

Mold Base K.O. Push Rod

For each press supply: THD, P & L 1 Press ejector plate 2 Press platen 3 Adapter frame clamp plate 4 Adapter ear plate

U.S. 800-626-6653 ■ • Canada 800-387-6600 ■ Mexico 52-442-713-5666

Made with FlippingBook - professional solution for displaying marketing and sales documents online