AF 109
12/18 14/20
4-Coupler Instant-Connect Waterline System For use with Standard Manifold
Choosing the right system for your application The 4-Coupler Instant-Connect Waterline System is designed to fit 12/18 and 14/20 Mold Base Adapter Systems. The 4-Coupler Instant-Connect waterline manifold provides 2 waterline inlets and outlets for both the cavity and core halves of the mold. The system is uniquely designed to accommodate a wide range of standard mold base sizes. This built-in flexibility is achieved through the use of either a Standard or Universal Manifold System. Standard Manifold System The Standard Manifold System is designed to fit any compatible mold base that does not extend over the face of the manifold. No mold modifications are necessary to use a Standard Manifold System. To achieve the full benefits of the system, one set of Instant-Connect manifolds and ear plates should be ordered for each mold base.
ITEM NO.
DESCRIPTION
EPM-FP-374
Standard Manifold
1.180
0.240
4.302
0.437
0.243
1.393
1/4 N.P.T.
EPM-FP-374 Ear Plate Manifold – Flow Plate, Supplied with Fittings
1.125
1.180
0.240
4.302
0.437
0.243
1.393
0.240
0.743
4.302
1.393 4-Coupler Instant-Connect Waterline System For use with Universal Manifold
1/4 N.P.T.
EPM-FP-374 Ear Plate Manifold – Flow Plate, Supplied with Fittings 0.437
1.180
1.125
0.240
4.302
ITEM NO. EPM-374
DESCRIPTION
1.125 Universal Manifold
0.243
EPM-374 Ear Plate Manifold Supplied with Fittings, Bolts, O-rings & Bushings 1/4 N.P.T.
1.393
0.240
0.743
4.302
1.180
EPM-FP-374 Ear Plate Manifold – Flow Plate, Supplied with Fittings 0.437
0.240
4.302
1.125
1.393
0.750
4.250
0.243
1.393
1/4 N.P.T.
1.125
1/4 N.P.T. EPM-374 Ear Plate Manifold Supplied with Fittings, Bolts, O-rings & Bushings SFP-374 Straight Flow Plate EPM-FP-374 Ear Plate Manifold – Flow Plate, Supplied with Fittings 0.743
0.240
4.302
1.250
1.125
1.393
1.250 Straight Flow Plate For use with Universal Manifold ITEM NO. SFP-374 0.240 1.393
0.750
4.250
0.743
4.302
1.125
1/4 N.P.T. EPM-374 Ear Plate Manifold Supplied with Fittings, Bolts, O-rings & Bushings
Universal Manifold System The Universal Manifold System
incorporates the use of one manifold with a family of interchangeable flow plates. Each flow plate accommodates a different mold base length (see table). The universal system offers two important advantages. Firstly, it allows the use of a wide range of mold base lengths. Secondly, it permits the use of a variety of mold bases with one universal manifold and interchangeable set of flow plates. To provide room for the attachment of extended flow plates, a pocket must be machined in the top and bottom clamp plate of the mold base. NOT RECOMMENDED for temperatures in excess of 200˚F Ordering information for the Instant-Connect Waterline System can be found on page AF 105, or call DME.
0.750 SFP-374 Straight Flow Plate
4.250
0.750
4.250
1.125
1/4 N.P.T. EPM-374 Ear Plate Manifold Supplied with Fittings, Bolts, O-rings & Bushings
Y
1.250
X
0.375
0.750 SFP-374 Straight Flow Plate 0.750
4.250
4.250
1.250
1/4 N.P.T. 1/4 N.P.T.
Y
X Extended Flow Plates For use with Universal Manifold ITEM NO. X Y 337-EFP-374 3.37 2.37 537-EFP-374 5.37 4.37 737-EFP-374 7.37 6.37 Y
0.375 SFP-374 Straight Flow Plate
0.750
4.250
1/4 N.P.T.
X
0.750
4.250
0.375
Y
1/4 N.P.T.
X
0.375
1/4 N.P.T.
U.S. 800-626-6653 ■ dme.net • store.dme.net Canada 800-387-6600 ■ Mexico 52-442-713-5666
Made with FlippingBook - professional solution for displaying marketing and sales documents online