AF 113
22/30 24/36
10-Coupler Instant-Connect Waterline System For use with Standard Manifold DESCRIPTION EPM-FP-5010 Standard Manifold ITEM NO.
Choosing the right system for your application
The 10-Coupler Instant-Connect Waterline System is designed to fit 22/30 and 24/36 Mold Base Adapter Systems. The 10-Coupler Instant-Connect waterline manifold provides 5 waterline inlets and outlets for both the cavity and core halves of the mold. The system is uniquely designed to accommodate a wide range of standard mold base sizes. This built-in flexibility is achieved through the use of either a Standard or Universal Manifold System. Standard Manifold System The Standard Manifold System is designed to fit any compatible mold base that does not extend over the face of the manifold. No mold modifica- tions are necessary to use a Standard Manifold System. To achieve the full benefits of the system, one set of Instant-Connect manifolds and ear plates should be ordered for each mold base.
0.240
0.500 1.493
12.302
0.246 1/4 N.P.T.
1.643
1.250
EPM-FP-5010 Ear Plate Manifold – Flow Plate, Supplied with Fittings
0.240 0.240
0.500 1.493
12.302
0.500 1.493
12.302
1.643 10-Coupler Instant-Connect Waterline System For use with Universal Manifold 1.643
0.246 1/4 N.P.T. 0.246
1.250 DESCRIPTION
ITEM NO. EPM-5010
EPM-FP-5010 Ear Plate Manifold – Flow Plate, Supplied with Fittings EPM-5010 Ear Plate Manifold Supplied with Fittings, Bolts, O-rings & Bushings
1.250
Universal Manifold
0.240
0.240
0.500 1.493
12.302
0.500 1.493
12.302
0.875
12.250
0.246
1.643
1.375
0.246 1/4 N.P.T.
1.643
1/4 N.P.T.
0.240
0.500 1.493 SFP-5010 Straight Flow Plate
12.302
1.250
EPM-5010 Ear Plate Manifold Supplied with Fittings, Bolts, O-rings & Bushings
1.250
EPM-FP-5010 Ear Plate Manifold – Flow Plate, Supplied with Fittings 0.246 1/4 N.P.T.
1.643
0.240
0.875
12.250
0.500 1.493
12.302
1.250 Straight Flow Plate For use with Universal Manifold 1.375
0.246 EPM-FP-5010 Ear Plate Manifold – Flow Plate, Supplied with Fittings
1/4 N.P.T.
Universal Manifold System The Universal Manifold System
1.643
12.250
0.875
ITEM NO. SFP-5010
0.500 1.493 SFP-5010 Straight Flow Plate
0.240
1.250 12.302
incorporates the use of one manifold with a family of interchangeable flow plates. Each flow plate accommodates a different mold base length (see table). The universal system offers two important advantages. Firstly, it allows the use of a wide range of mold base lengths. Secondly, it permits the use of a variety of mold bases with one universal manifold and interchangeable set of flow plates. To provide room for the attachment of extended flow plates, a pocket must be machined in the top and bottom clamp plate of the mold base. NOT RECOMMENDED for temperatures in excess of 200˚F Ordering information for the Instant-Connect Waterline System can be found on page AF 105, or call DME.
EPM-5010 Ear Plate Manifold Supplied with Fittings, Bolts, O-rings & Bushings 0.246
Y
1.643
X
0.563
0.875
12.250 1.250
1/4 N.P.T. EPM-5010 Ear Plate Manifold Supplied with Fittings, Bolts, O-rings & Bushings 0.875 1/4 N.P.T.
1.375
12.250
SFP-5010 Straight Flow Plate 0.875
12.250
Y
1.375
X
0.563
1/4 N.P.T.
Extended Flow Plates For use with Universal Manifold ITEM NO. X Y 337-EFP-5010 3.37 2.06 537-EFP-5010 5.37 4.06 737-EFP-5010 7.37 6.06
SFP-5010 Straight Flow Plate
1/4 N.P.T.
12.250
0.875
Y
X
0.563
12.250
0.875
Y
1/4 N.P.T. 0.563
X
1/4 N.P.T.
U.S. 800-626-6653 ■ dme.net • store.dme.net Canada 800-387-6600 ■ Mexico 52-442-713-5666
Made with FlippingBook - professional solution for displaying marketing and sales documents online