C 126
Hoist Rings – INCH Installation and Ordering Information
H
Installation Data Tap workpiece for hoist ring bolt with axis vertical to mounting surface. Work surface should
Material: Alloy steel (certified heat treatment), black oxide Safety Factor: 5 times rated load in any direction Range of Movement.: 360° swivel; 180° pivot
be flat and smooth to provide full 360° flush seating for the bushing flange. For installation in ferrous materials, the screw should be tightened to the full torque loading recommended in column TL below, +25% – 0. (NOTE: Some loosening may develop after prolonged service in a permanent installation. It is advisable to periodically retighten the mounting bolt to maintain the specified torque value.) For maximum safety with soft metal workpieces such as aluminum, use extra length bolts with minimum
J
B
A RADIUS
effective thread engagement of 2 times thread diameter. The use of free fit spacers between
Ø D
F
the bushing flange and mounting surface is not recommended, as this will reduce the load rating on angularly applied loads. Hoist ring must be free to swivel 360° and pivot 180° at all times.
C
BUSHING FLANGE
E
L
G THREAD
K
NOTE: Additional hoist ring sizes and bolt lengths
(including metric versions) are also available on request.
Hoist Rings – SHR (includes bolt and retaining ring)
E EFFECTIVE THREAD PROJECTION F
RATED LOAD (LBS)
H CLEARANCE DIMENSION J
ITEM NUMBER SHR0001 SHR0002 SHR0003 SHR0004 SHR0005
A RADIUS B
TL** FOOT LBS WEIGHT
C Ø D
G
K
L
800 7/16 1,000 7/16
15/8 41/64 3/8 15/8 41/64 3/8 31/4 15/32 3/4 31/4 15/32 3/4 31/4 15/32 3/4
9/16 9/16
25/8 5/16-18 25/8 3/8-16 43/4 1/2-13 43/4 5/8-11 43/4 3/4-10 61/2 1"-8 83/4 11/4-7
2 2
1 1
3/4 3/32 3/4 3/32
7
5 OZ. 5 OZ.
12 28 60
2,500 4,000 5,000
7/8 7/8 7/8
3/4
35/8 35/8 35/8 51/8 61/2
2 11/2 3/32 2 11/2 3/32 2 11/2 3/32 3 25/16 17/64 33/4 31/4 11/32
2 LB. 5 OZ. 2 LB. 7 OZ. 2 LB. 9 OZ.
1 1
100 230 470
SHR0006 10,000 113/32 413/16 111/16 1
11/2 17/8
7 LB.
SHR0007 15,000 13/4
6
21/8 11/4
14 LB.
Replacement Bolt Kits – SHK (includes bolt and retaining ring) **Recommended torque load +25% – 0
ITEM NUMBER USED WITH
SIZE
E
SHK0001 SHK0002 SHK0003 *SHK0004 SHK0005 *SHK0006 SHK0007 *SHK0008 SHK0009 *SHK0010 SHK0011
SHR0001 SHR0002
5/16 -18 X 11/4 3/8 -16 X 11/4
9/16 9/16
1/2 -13 X 2
3/4
SHR0003
1/2 -13 X 21/4 5/8 -11 X 21/4 5/8 -11 X 21/2 3/4 -10 X 21/4 3/4 -10 X 23/4
1 1
SHR0004
11/4
1
SHR0005
11/2 11/2
NOTES: E = Effective Thread Projection
1"-8 X 31/4 1"-8 X 33/4 11/4 -7 X 4
SHR0006
2
*Bolts not marked with an asterisk (*) are identical to those supplied with hoist rings. Bolts marked with an asterisk are longer to provide thread projection of twice the bolt diameter, recommended for use with softer metals.
17/8
SHR0007
U.S. 800-626-6653 • dme.net • store.dme.net Canada 800-387-6600 • Mexico 52-442-713-5666
Made with FlippingBook - professional solution for displaying marketing and sales documents online