C 131
Quick-Change Components Insert Mold Pillar Posts
Ø D
Ø D
FRAME WITHOUT EJECTOR PLATE
FRAME WITH EJECTOR PLATE AND NO PAD
FRAME WITH EJECTOR PLATE AND SUPPORT PAD
Insert Mold Pillar Posts
+.001 TO +.002
+.001 TO +.002
ITEM NO. MPP1025 MPP1026 MPP1035 MPP1037 MPP1040 MPP1041 MPP1225 MPP1226 MPP1235 .375 MPP1237 MPP1240 1.750 MPP1241 MPP1525 MPP1526 MPP1535 MPP1537 MPP1540 MPP1541
DIAMETER
LENGTH
BOLT
L
.375
L
1.00 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.50
2.500 2.625 3.500 3.750 4.000 4.125 2.500 2.625 3.500 3.750 4.000 4.125 2.500 2.625 3.500 3.750 4.000 4.125
5/16 5/16 5/16
CUSTOMER TO INSTALL RUNNER
10-32 SHCS
3/8 3/8 3/8
.375
.875
Ø SHCS C'BORE BOLT INCLUDED
Ø SHCS C'BORE BOLT INCLUDED
5/16 5/16 5/16
.25 R
3/8 3/8 3/8
DME cold-rolled steel pillar posts are precision ground to length for MUD® Quick-Change systems. Each is predrilled and supplied with socket head cap screws for easy installation in insert molds. Frames supplied with master ejector plates are supplied standard with pillar post pads. The pillar post pad is the same height as the height of the ejection. In cases where pillar post pads are not utilized, the pillar post will rest on the back clamp plate. All molds require pillar posts and the pillar post will be precision ground .001 to .002 higher than the height of ejection.
5/16 5/16 5/16
3/8 3/8 3/8
Bolt included with each pillar post. Other sizes available on request.
Quick-Change Components Hardened Runner Pads FRAME WITHOUT EJECTOR PLATE FRAME WITH EJECTOR PLATE AND NO PAD FRAME WITHOUT EJECTOR PLATE FRAME WITH EJECTOR PLATE AND NO PAD
FRAME WITH EJECTOR PLATE AND SUPPORT PAD
FRAME WITH EJECTOR PLATE AND SUPPORT PAD
.375
.375
CUSTOMER TO INSTALL RUNNER
CUSTOMER TO INSTALL RUNNER
10-32 SHCS
10-32 SHCS
.375
.375
.875
.875
Hardened Runner Pads
.375
.25 R
.375
.25 R
DME hardened runner pads are designed for installation in insert molds ordered for MUD® Quick-Change shuttle frame applications (09/07UF, 09/07EB and 12/08UF). These pads allow the mold- ing machine injection nozzle to contact the com- panion insert mold without damage.
1.750
1.750
ITEM NO. 09/07HRP
One required for each insert mold half. Includes (2) 10-32 x 21/2" cap screw.
U.S. 800-626-6653 • dme.net • store.dme.net Canada 800-387-6600 • Mexico 52-442-713-5666
Made with FlippingBook - professional solution for displaying marketing and sales documents online