OP 139
Quick-Change Options U Frames with Master Ejector Systems
Ordering Information for U Frame with Master Ejector System • Item number and description (see table below right) • “S” diameter of locating ring supplied standard 3.990 • Sprue bushing (if required) – “R” spherical radius of sprue bushing furnished 1/2” or 3/4” • “O” small diameter of sprue orifice furnished 7/32”, 9/32” or 11/32”; 5/32” available on request • Optional locating rings and sprue bushings • Knockout hole locations standard as shown (others optional) • Clamp slots as shown • Mounting holes optional • Additional ejection height available (quotation on request) • Optional interlocking ejector plate rails available (quotation on request) • Frames standard in prehard steel; prehard stainless and other steel grades available (quotation on request)
MUD® U frames with master ejector systems are designed to accept one Quick-Change insert mold or a removable center section with two smaller Quick-Change insert molds for complete application flexibility. Each frame’s master ejector system is equipped with pillar post pads to sup- port insert molds.
S
O
R
C
U Frame with Self-Contained Master Ejector System
.56 R
ITEM NO.
C
3.50
3.00
10/12UF321MEP 10/14UF321MEP 10/16UF321MEP 12/14UF321MEP 12/16UF321MEP 12/18UF321MEP 13/16UF321MEP 13/18UF321MEP 14/16UF321MEP 14/18UF321MEP
2.500 2.500 2.500 2.750 2.750 2.750 2.750 2.750 2.750 2.750
Ø 1 1/8
L
W
U.S. 800-626-6653 • dme.net • store.dme.net Canada 800-387-6600 • Mexico 52-442-713-5666
Made with FlippingBook - professional solution for displaying marketing and sales documents online