UF 22
09/07 UF 321
UF Quick-Change U-Style Shuttle Frame & Companion Insert Molds
Companion Interchangeable Insert Molds 1 Frame clamps at this end of insert mold.
Shuttle Frame ITEM NO. 09/07 UF 321
Standard Solid: 6.0 x 6.75
T-Style Solid or Laminated: 9.0 x 6.75
Optional
.31
1
1
UF 321 Frame Upper – Side View
.437
.562
6.000
Ejector Half
Ejector Half
6.000
.75 1.50
6.750
6.750
1.06
.60
UC 3816
.75
.562
.437
Ø 5/16 Dowel
.44
Hardened runner pads available (quota- tion on request).
.687 Offset
.562 Offset
± .001
5.25
5.996 6.456
9.000
UF 321 Frame Upper – Top View
1/2-13 THD (4)
.246
6.456
.246
.75
± .001
.230
.75
5.996
.230
1.50
A
A
A2
A2
Ø .500
Ø .375
Cavity half, one (1) required.
B2
B2
B
B
UF 321 Frame Lower – Side View
.75
.75
3/8-16 THD
.75
2.00
.250
Ø 2.00
Standard Solid Construction
ITEM NO.
A
A2
B2
B
.255
.253
Ø 1.75
09/07 SSU 221 2.250 1.500
1.500 2.250
1.25
UF 321 Frame Lower – Top View
T-Style Solid Construction
3/8 x 5° Lead
+ .002 -.000
ITEM NO.
A
A2
B2
B
6.000
09/07 TSU 241 2.250 1.500
1.500 2.250
2.00
4.250
6.000
T-Style Laminated Construction
6.75
ITEM NO.
A
A2
B2
B
09/07 TLU 201 2.250 1.500
1.500 2.250
1.750
2.50
.75
Ordering information for frame and companion insert molds can be found in the front of this section.
.375
9.00
Drill & C’Bore for 1/2-13 SHCS (4)
Ejector half, two (2) required.
KO Rod Spacer
NOTE: When ejection is required, pockets
can be machined in ejector half of insert mold and ejector plates installed.
Two (2) required.
.25
1.245
Knockout rod spacer standard as shown.
Ø 1.745
Ø 1.980
NOTE:Insert molds can be ordered with two (2) “B” halves by noting “S” after catalog code number.
U.S. 800-626-6653 ■ dme.net • store.dme.net Canada 800-387-6600 ■ Mexico 52-442-713-5666
Made with FlippingBook - professional solution for displaying marketing and sales documents online