Child Safety Roman Blind Cassette Systems
Our Blind Systems are tested to British Standards BSEN13120:2009+A1:2014. Each system comes complete with all the labels, safety devices & instructions to make your blinds compliant.
Jones Interiors Cassette System Check List Four Simple Steps to Blind Compliancy
1. All Warning Labels are attached. 2. The Chain is either at least 150cm above the ground and fitted with our Chain Safety Device (H700CSD). or 1. The Chain is fitted with our Chain Breaker (H4048CB) & is at least 60cm above the ground. 2. The Safety Toggles (H700ST or H700CT) are fitted.
Once all the above items are ticked your blind will be compliant with BSEN13120:2009+A1:2014.
Operating Chain Current Child Safety Legislation now demands that we ask you for the installation heights when making your “Made To Measure” systems as these have a bearing on the maximum continuous chain drops allowable. These chains must then be attached using our chain safety device to minimise the risk of strangulation. Full instructions are included with every despatch & we stress these must be followed in order for your system to remain compliant. The chain size is not always convenient for every customer so we now offer a chain breaker device H4048CB. This will cause the chain to break within the prescribed maximum load of 6kgs & in turn allows the use of chains down to no less than 60cm from the floor. Please note in these cases you should not install the ‘p clip’ supplied with our systems. It does however carry the limitation of not passing through the mechanism so will not operate with our 1:4 geared units. Using our 1:1 mechanism will allow the successful operation of the chain breaker providing your chain loop is at least half the full length of your Roman Blind when fully lowered. A slightly longer chain is required when using a 1:2 mechanism.
For those customers preferring the security of using continuous chains only, we now offer a much wider range of shorter drop sizes for your convenience.
The information above is only intended to give general and preliminary guidance to the reader on the General Product Safety Regulations. A full copy of these regulations is available at www.bsigroup.co.uk. The information should not form the basis upon which the reader makes any decisions or conclusions concerning their own rights or their obligations under the General Product Safety Regulations. Jones & Co (Nottingham) Ltd strongly recommend that the reader obtains detailed and specific legal advice from their own legal counsel concerning their position. Jones & Co (Nottingham) Ltd cannot guarantee that the standards or regulations will not be changed before coming into force, or after having come into force will be subject to change, or how the regulations will be interpreted. Jones & Co (Nottingham) Ltd are not responsible for any errors, omissions, or statements made. Jones & Co (Nottingham) Ltd are not responsible for any loss, howsoever caused, and whether arising directly or indirectly from reliance upon the information and any recommendations provided by Jones Interiors to any reader of this material.
0115 9738 708 | sales@jones-interiors.com
232
Made with FlippingBook - professional solution for displaying marketing and sales documents online