Stoddart Plumbing Brochure

PLUMBING PRODUCTS

PRODUCT GUIDE

202 4

Urinals

Toilets

Flushing Devices

Basins

Commercial Sinks

Baths & Showers

Drainage & Tanks

Safe Ensuite

Simply Stainless

Sani Grate - Walk-On Urinal

Maxi Step Urinal

Slab Step Urinal

Urinal Trough - Wall Hung

Pod Urinal

URINALS

Sani Grate - Walk-On Urinal

Features and Benefits: •

Model: SPPL.UR.G.xxxx.yy SPPL = Stoddart Plumbing Product UR = Urinal G = Grated xxxx = Nominated Length yy = T - top water entry = R - rear water entry = R - right waste = L - left waste eg.: for specification and ordering quote Code: SPPL.UR.G.1800.RR *L & U shaped configurations available.

Fully supported on legs for easy installation (no need to fill void under trough with slurry) 610mm depth sides for superior hygiene

•

• Concealed vandal resistant sparge to ensure proper wash with each flush • The unit can be set into floor (recessed so the top grate is flush with floor), or set on floor (can be fitted with optional stainless steel front kick panel) • Stainless steel grate is high strength, slip resistant, and hinged for cleaning access • Internal corners have large radius for easy cleaning and effective drainage • Fall to waste of 1:80 ensures proper drainage • Compressed fibre-cement backing provides ‘anti-drum’ noise suppression • Optional freestanding finished end panels available where there are no walls • Top edge can have either returned finished edge or tile edge • Custom lengths available

Nominated Length

1mm in 80mm Fall to Waste

24.5

190

Plan View

Optional Kick Plate

Front View

End View

Specifications: Construction:

Sold Separately

Fully welded 1.2mm thick 304 stainless steel construction, no.4 satin finish. Water Connection: Top entries in ø25 and ø38 dia. Rear entry in

Flushing Device Options:

25mm pressure pipe. Custom inlet positions available. Designed for WELS approved flush devices. 50mm to 100mm dropper outlets available Custom waste positions available.

FD.CI.PC

FD.EUFS.MIC

Waste Connection:

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 1.5 litres per flush

The WaterMark License No. WM-022373 AS/NZS 3982

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 7/06/2022 A -

1-4

www.stoddart.com.au www.stoddart.co.nz

URINALS

Maxi Step Urinal Model: SPPL.UR.G.MS.xxxx.yy SPPL = Stoddart Plumbing Product UR = Urinal MS = Maxi Step xxxx = Nominated Length yy = T = top entry water supply = R = rear entry water supply = L = left end waste = R = right end waste eg.: for specification and ordering quote Code: SPPL.UR.G.MS.1500.TL *L & U shaped configurations available.

Features and Benefits: •

Fully supported on legs for easy installation (no need to fill void under trough with slurry) 600mm depth sides for superior hygiene

•

Nominated Length

1mm in 80mm Fall to Waste

24.5

190

Plan View

900

Optional Kick Plate

Specifications: Construction:

End View

Front View

Fully welded 1.2mm thick 304 stainless steel construction, no.4 satin finish. Water Connection: Top entries in ø25 and ø38 dia. Rear entry in

Sold Separately

25mm pressure pipe. Custom inlet positions available. Designed for WELS approved flush devices. 50mm to 100mm dropper outlets available Custom waste positions available.

Flushing Device Options:

Waste Connection:

FD.CI.PC

FD.EUFS.MIC

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 1.5 litres per flush

The WaterMark License No. WM-022373 AS/NZS 3982

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision:

9/05/2024

A -

1-5

www.stoddart.com.au www.stoddart.co.nz

URINALS

Slab Step Urinal

Features and Benefits: • Compressed fibre-cement backing for strength and superior noise suppression • Top or rear water entry • Concealed sparge spreader for full face waterfall flush • All internal corners to 25mm radius • Custom lengths available

Model: SPPL.UR.S.xxxx.yy SPPL = Stoddart Plumbing Product UR = Urinal S = Slab xxxx = Length of urinal yy = T - top water entry = R - rear water entry = R - right waste = L - left waste eg.: for specification and ordering quote Code: SPPL.UR.S.1800.RR *L & U shaped configurations available.

R/H Waste Available L/H Waste Shown

Plan View

Nominated Length

350 Max 3 00 Min

Concrete Step (by builder)

Fernco Cap

Front View

Section A-A

320

End View

Sold Separately

Specifications: Construction:

Flushing Device Options:

Fully welded 1.2mm thick 304 stainless steel construction, no.4 satin finish. Fibre-cement reinforced backing. Water Connection: Top entries in ø25 and ø38 dia. Rear entry in

25mm pressure pipe. Custom inlet positions available. Designed for WELS approved flush devices. 50mm to 100mm dropper outlets available Custom waste positions available.

FD.CI.PC

FD.EUFS.MIC

Waste Connection:

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 1.5 litres per flush

The WaterMark License No. WM-022373 AS/NZS 3982

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 7/06/2022 A -

1-6

www.stoddart.com.au www.stoddart.co.nz

URINALS

Wall Hung Urinal Trough

Model: SPPL.UR.W.xxxx.yy SPPL = Stoddart Plumbing Product UR = Urinal W = Wall Hung xxxx = Nominated Length yy = T = top entry water supply = R = rear entry water supply = L = left end waste = R = right end waste eg.: for specification and ordering quote Code: SPPL.UR.W.2400.TL *L & U shaped configurations available.

Features and Benefits: • Cost effective solution for site sheds and demountable buildings • 50mm domed threaded waste can be ordered left or right • 25mm internal radius corners • Custom lengths available

Nominated Length

38mm 25mm

1mm in 80mm Fall to waste

100

Plan View

5.0mm Fixing Holes

Water Inlet

2" Domed Waste

Fixing Lug

Front View

249

(rear entry position)

Specifications: Construction:

Fully welded 1.2mm thick 304 stainless steel construction, no.4 satin finish. Integrated mounting brackets. Water Connection: Top entries in ø25 and ø38 dia. Rear entry in

End View

25mm pressure pipe. Custom inlet positions available. Designed for WELS approved flush devices. 50mm threaded outlet Positioned 100mm from side wall. Unit is designed to be positioned so as the front lip of the urinal is approximately 600mm from the finished floor level. Supplied with stainless steel mounting bracket at base for screw fixing to the wall. Unit should also be screwed to the wall through the top fixing edge.

Sold Separately

Flushing Device Options:

Waste Connection:

Unit Fixing:

FD.CI.PC

FD.EUFS.MIC

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 1.5 litres per flush

The WaterMark License No. WM-022373 AS/NZS 3982

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision:

7/06/2022

A -

1-7

www.stoddart.com.au www.stoddart.co.nz

URINALS

Pod Urinal

Model: SPPL.UR.P.xx SPPL

Features and Benefits: •

Vandal resistant, ideal for public amenities, clubs, pubs, sporting grounds, site sheds and demountable buildings • Cost effective solution • Modern, sleek design

= Stoddart Plumbing Product

= Urinal = POD

xx = T = top entry water supply = R = rear entry water supply eg.: for specification and ordering quote Code: SPPL.UR.P.xx

225

50mm Outlet

Plan View

130 150

Rear View

360

395

Chrome Plated Spreader

1/2" BSP Male Inlet

210

Front View

End View

Specifications: Construction:

Fully welded 1.2mm thick 304 stainless steel construction, no.4 satin finish.

Sold Separately

Water Connection: Top or rear entry Designed for WELS approved flush devices.

Flushing Device Options:

Waste Connection:

50mm threaded outlet.

Unit Fixing:

Rear mounting strip Suggested mounting heights (dimensions from floor to front rim of unit) Adults - 610mm, Children - 510mm.

FD.CI.PC

FD.EUFS.MIC

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 1.8 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 7/06/2022 A -

1-8

www.stoddart.com.au www.stoddart.co.nz

URINALS

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision:

7/06/2022

1-9

www.stoddart.com.au www.stoddart.co.nz

TP3 Pan - Standard

TP3 Pan - Access Compliant

TP3 Pan - Ambulant

TP4 Pan - Standard

TP4 Pan - Access Compliant

TP4 Pan - Ambulant

Wall Hung Pan - Standard

Wall Hung Pan - Access Compliant

Wall Hung Pan - Ambulant

Close Coupled Suite - Standard

Close Coupled Suite - Access Compliant

Close Coupled Suite - Ambulant

Toilet Pan - Long Drop

Toilet & Basin Security Combination

Contraband Control Inspection Unit

TOILETS

Pan - TP3 Standard

Model: SPPL.TP.3.S SPPL

Features and Benefits: •

2mm heavy duty (1000kg) load carrying capacity

= Stoddart Plumbing Product

• Plumbing and fixing points are concealed for security and vandal resistance • Access to plumbing is via side access panels • Anti-contraband flushing rim • Seat has smooth hydraulically formed radius to both outer and inner edges for safety and comfort and has a self draining seat surface for improved hygiene • All external corners are rounded with a smooth radius for safety • These toilets can be flushed with either a flush valve or in wall cistern (ordered separately) • Powder coated to colour of choice optional • Optional 316 grade stainless steel suitable for highly corrosive and coastal environments

= Toilet Pan

3 S

= Type 3

= Standard (H400mm, L700mm) eg.: for specification and ordering quote Code: SPPL.TP.3.S

Plan View

Rear View

Specifications: Construction:

367

Toilet bowl and Trap – 304 stainless steel. Seat, Body and shroud – 2mm 304 stainless steel no.4 satin finish (Options; Super Heavy Duty: 3mm 304 outer body). WELS approved 4.5L full flush/3L half flush. Flushing device must be able to deliver 1.4 litres per second to the toilet pan (as per AS1172).

Flushing:

282

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC.

Front View

End View

Optional P-S adaptors can be ordered separately not supplied as standard.

Sold Separately

Flushing Device Options:

Toilet Seat Options:

Unit Fixing:

The unit is designed to be fixed to the rear wall with 4 bolts. A Z-clip is supplied to secure the front of the base to the floor.

CMPL.0915

CMPL.1005

FD.CI.IW.MDF

FD.CI.IW.EFV

Model No.

L x D x H (mm)

SPPL.TP.3.S

367 x 700 x 400

FD.CI.IW.PRF FD.CI.IW.PRF.CB

CMPL.0814

Inlet Height Outlet Height

Waste Set-Out

360 ± 3

191 ± 3

95 ± 5 Standard Pan Bend (not supplied)

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: www.stoddart.com.au www.stoddart.co.nz A - Revision: A3 - 16/06/23 16/06/2023

2-1

TOILETS

Pan - TP3 Access Compliant

Model: SPPL.TP.3.D SPPL

Features and Benefits: •

= Stoddart Plumbing Product

2mm heavy duty (1000kg) load carrying capacity

= Toilet Pan

= Type 3

= Disabled Access (H460mm, L800mm)

eg.: for specification and ordering quote Code: SPPL.TP.3.D

Plan View

Rear View

367

Specifications: Construction:

Flushing:

269

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Front View

End View

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC.

Optional P-S adaptors can be ordered separately not supplied as standard.

Sold Separately

Unit Fixing:

The unit is designed to be fixed to the rear wall with 4 bolts. A Z-clip is supplied to secure the front of the base to the floor.

Flushing Device Options:

Toilet Seat Options:

CMPL.0915

CMPL.1005

FD.CI.IW.MDF

FD.CI.IW.EFV

Model No.

L x D x H (mm)

SPPL.TP.3.D

367 x 800 x 460

Inlet Height Outlet Height

Waste Set-Out

CMPL.0814

FD.CI.IW.PRF FD.CI.IW.PRF.CB

420 ± 3

251 ± 3 195 ± 5 Standard Pan Bend (not supplied)

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 16/06/2023 B - Revision: B3 - 16/06/23

2-2

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Pan - TP3 Ambulant

Model: SPPL.TP.3.A SPPL

Features and Benefits: •

= Stoddart Plumbing Product

2mm heavy duty (1000kg) load carrying capacity

= Toilet Pan

3 A

= Type 3

= Ambulant (H460mm, L650mm) eg.: for specification and ordering quote Code: SPPL.TP.3.A

Plan View

Rear View

Specifications: Construction:

367

Flushing:

269

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC.

Front View

End View

Optional P-S adaptors can be ordered separately not supplied as standard.

Sold Separately

Unit Fixing:

The unit is designed to be fixed to the rear wall with 4 bolts. A Z-clip is supplied to secure the front of the base to the floor.

Flushing Device Options:

Toilet Seat Options:

FD.CI.IW.MDF

FD.CI.IW.EFV

CMPL.0915

CMPL.1005

Model No.

L x D x H (mm)

SPPL.TP.3.A

367 x 650 x 460

Inlet Height Outlet Height

Waste Set-Out

FD.CI.IW.PRF FD.CI.IW.PRF.CB

CMPL.0814

420 ± 3

279 ± 3 175 ± 5 Standard Pan Bend (not supplied)

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: www.stoddart.com.au www.stoddart.co.nz Revision: B3 - 16/06/2023 16/06/2023 B -

2-3

TOILETS

Toilet Pan - TP4 Standard

Model: SPPL.TP.4.S SPPL

Features and Benefits: •

= Stoddart Plumbing Product

2mm heavy duty (1000kg) load carrying capacity

= Toilet Pan

• Hydraulically formed seat with smooth radius to inner and outer edges for safety and comfort • Self draining surface for improved hygiene • Concealed plumbing and fixing points for security and vandal resistance • Top secure access panel • Anti-contraband flushing rim • Powder coated to colour of choice optional • These toilets can be flushed with either a flush valve or cistern (ordered separately) • Optional 316 grade stainless steel suitable for highly corrosive and coastal environments

4 S

= Type 4

= S = Standard (H400mm, L650mm)

eg.: for specification and ordering quote Code: SPPL.TP.4.S

Plan View

Rear View

367

Specifications: Construction:

Flushing:

282

Front View

End View

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Sold Separately

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC.

Flushing Device Options:

Toilet Seat Options:

Optional P-S adaptors can be ordered separately not supplied as standard.

Unit Fixing:

The unit is designed to be fixed to the rear wall with 4 bolts. A Z-clip is supplied to secure the front of the base to the floor.

CMPL.0915

CMPL.1005

FD.CI.IW.MDF

FD.CI.IW.EFV

Model No.

L x D x H (mm)

CMPL.0814

FD.CI.IW.PRF FD.CI.IW.PRF.CB

SPPL.TP.4.S

367 x 650 x 460

Inlet Height Outlet Height

Waste Set-Out

~ 175 Plastec Universal Pan Bend

360 ± 3

191 ± 3

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 16/06/2023 Revision: A3 - 16/06/23 A -

2-4

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Toilet Pan - TP4 Access Compliant

Model: SPPL.TP.4.D SPPL

Features and Benefits: •

= Stoddart Plumbing Product

2mm heavy duty (1000kg) load carrying capacity

= Toilet Pan

= Type 4

= D = Disabled Access (H460mm, L800mm)

eg.: for specification and ordering quote Code: SPPL.TP.4.D

Plan View

Rear View

Specifications: Construction:

367

Flushing:

269

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC.

Front View

End View

Optional P-S adaptors can be ordered separately not supplied as standard.

Sold Separately

Unit Fixing:

The unit is designed to be fixed to the rear wall with 4 bolts. A Z-clip is supplied to secure the front of the base to the floor.

Flushing Device Options:

Toilet Seat Options:

CMPL.0915

CMPL.1005

FD.CI.IW.MDF

FD.CI.IW.EFV

Model No.

L x D x H (mm)

SPPL.TP.4.D

367 x 800 x 535

Inlet Height Outlet Height

Waste Set-Out

CMPL.0814

FD.CI.IW.PRF FD.CI.IW.PRF.CB

~ 195 Standard Pan Bend (not supplied)

420 ± 3

251 ± 3

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: Revision: A3 - 16/06/23 16/06/2023 A -

2-5

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Toilet Pan - TP4 Ambulant

Model: SPPL.TP.4.A SPPL

Features and Benefits: •

= Stoddart Plumbing Product

2mm heavy duty (1000kg) load carrying capacity

= Toilet Pan

4 A

= Type 4

= A = Ambulant (H460mm, L650mm)

eg.: for specification and ordering quote Code: SPPL.TP.4.A

Plan View

Rear View

367

Specifications: Construction:

Flushing:

269

Front View

End View

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC.

Sold Separately

Optional P-S adaptors can be ordered separately not supplied as standard.

Flushing Device Options:

Toilet Seat Options:

Unit Fixing:

The unit is designed to be fixed to the rear wall with 4 bolts. A Z-clip is supplied to secure the front of the base to the floor.

CMPL.0915

CMPL.1005

FD.CI.IW.MDF

FD.CI.IW.EFV

Model No.

L x D x H (mm)

SPPL.TP.4.A

367 x 650 x 530

CMPL.0814

FD.CI.IW.PRF FD.CI.IW.PRF.CB

Inlet Height Outlet Height

Waste Set-Out

~ 175 Plastec Universal Pan Bend

420 ± 3

251 ± 3

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 16/06/2023 Revision: A3 - 16/06/23 A -

2-6

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Wall Hung Toilet Pan - Standard

Model: SPPL.TP.WH.4.S SPPL

Features and Benefits: • Hydraulically formed seat with smooth radius to inner and outer edges for safety and comfort. • Seat area is sloped to drain into the bowl for improved hygiene • Heavy duty (500kg) load carrying capacity (depending on wall structure) • Concealed plumbing and fixing points for security and vandal resistance • Engineered flushing rim prevents hiding of contraband while allowing free flow of flush water • Powder coated to colour of choice optional • Optional 316 grade stainless steel suitable for highly corrosive and coastal environments • These toilets can be flushed with either a flush valve or in-wall cistern (ordered separately)

= Stoddart Plumbing Product

= Toilet Pan

WH.4

= Wall Hung Type 4

S = Standard eg.: for specification and ordering quote Code: SPPL.TP.WH.4.S

5mm S/S Rear Fixing Plate

Plan View

Rear View

367

720

Front View

End View

Specifications: Construction:

Sold Separately

Toilet bowl and Trap – 304 stainless steel. Seat, Body and shroud – 2mm 304 stainless steel no.4 satin finish WELS approved 4.5L full flush/3L half flush. Flushing device must be able to deliver 1.4 litres per second to the toilet pan (as per AS1172).

Flushing Device Options:

Toilet Seat Options:

Flushing:

CMPL.0915

CMPL.1005

FD.CI.IW.MDF

FD.CI.IW.EFV

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC. The unit is designed to be fixed to the rear wall with 4 x Ø 16 stainless steel bolts.

CMPL.0814

FD.CI.IW.PRF FD.CI.IW.PRF.CB

Unit Fixing:

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: Revision: A3 - 16/06/23 16/06/2023 A -

2-7

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Wall Hung Toilet Pan - Access Compliant

Model: SPPL.TP.WH.4.D SPPL

= Stoddart Plumbing Product

= Toilet Pan

WH.4

= Wall Hung Type 4

D = Disabled Access eg.: for specification and ordering quote Code: SPPL.TP.WH.4.D

5mm S/S Rear Fixing Plate

Plan View

Rear View

367

800

Front View

End View

Specifications: Construction:

Sold Separately

Flushing Device Options:

Toilet Seat Options:

Flushing:

CMPL.0915

CMPL.1005

FD.CI.IW.MDF

FD.CI.IW.EFV

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC. The unit is designed to be fixed to the rear wall with 4 x Ø 16 stainless steel bolts.

CMPL.0814

FD.CI.IW.PRF FD.CI.IW.PRF.CB

Unit Fixing:

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 16/06/2023 Revision: A3 - 16/06/23 A -

2-8

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Wall Hung Toilet Pan - Ambulant

Model: SPPL.TP.WH.4.A SPPL

= Stoddart Plumbing Product

= Toilet Pan

WH.4

= Wall Hung Type 4

A = Ambulant eg.: for specification and ordering quote Code: SPPL.TP.WH.4.A

5mm S/S Rear Fixing Plate

Plan View

Rear View

620

367

Front View

End View

Specifications: Construction:

Sold Separately

Flushing Device Options:

Toilet Seat Options:

Flushing:

CMPL.0915

CMPL.1005

FD.CI.IW.MDF

FD.CI.IW.EFV

Water Connection:

Inlet Key-Seal supplied for 40mm flush pipe.

Waste Connection:

P trap standard, with rubber coupling included to suit 100mm PVC. The unit is designed to be fixed to the rear wall with 4 x Ø 16 stainless steel bolts.

CMPL.0814

FD.CI.IW.PRF FD.CI.IW.PRF.CB

Unit Fixing:

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: Revision: A3 - 16/06/23 16/06/2023 A -

2-9

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Close Coupled Toilet Suite - Standard

Model: SPPL.TP.CC1.S SPPL

Features and Benefits: • Smooth hydraulically formed radius to outer and inner edges provide safety and user comfort • Formed stainless seat provides superior comfort, hygiene and strength • Secure flushing device access cover fastened with Torx security screws • Optional vandal resistant Thermoplastic seat can be added (refer below) • Engineered flushing rim prevents hiding of contraband while allowing free flow of flush water • Stainless steel construction provides superior strength, superior hygiene and long service life • Optional 316 grade stainless steel suitable for highly corrosive and coastal environments • Powder coated to colour of choice optional

= Stoddart Plumbing Product

= Toilet Pan

CC1

= Close Coupled

S = Standard eg.: for specification and ordering quote Code: SPPL.TP.CC1.S

367

100

Plan View

Rear View

650

Specifications: Construction:

2mm thick, 304 stainless steel no.4 satin finish

Flushing:

WELS approved 4.5L full flush/3L half flush

Water Connection:

15mm BSP connection

Waste Connection:

P-S adaptor supplied

282

Unit Fixing:

The unit has holes for fixing to floor and wall. A Z-clip is supplied to secure the front of the base to the floor when unit is pushed to wall

Sold Separately

Front View

End View

Toilet Seat Options:

Model No.

L x D x H (mm)

TP.CC1.S

367 x 650 x 980

CMPL.0814

CMPL.0915

CMPL.1005

Inlet Height Outlet Height

Waste Set-Out

~ 175 Plastec Universal Pan Bend

358 ± 3

191 ± 3

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 16/06/2023 Revision: B4 - 16/06/2023 B -

2-10

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Close Coupled Toilet Suite - Ambulant

Features and Benefits: • Smooth hydraulically formed radius to outer and inner edges provide safety and user comfort • Formed stainless steel seat and construction provides superior comfort, hygiene and strength • Optional vandal resistant Thermoplastic seat can be added (refer below) • Secure flushing device access cover fastened with Torx security screws • Engineered flushing rim prevents hiding of contraband while allowing free flow of flush water • Optional 316 grade stainless steel suitable for highly corrosive and coastal environments • Powder coated to nominated colour optional • Meets Ambulant requirements

Model: SPPL.TP.CC1.A SPPL

= Stoddart Plumbing Product

= Toilet Pan

CC1

= Close Coupled Cistern

A = Ambulant eg.: for specification and ordering quote Code: SPPL.TP.CC1.A

367

100

Plan View

Rear View

650

Specifications: Construction:

2mm thick, 304 stainless steel no.4 satin finish

282

Flushing:

WELS approved 4.5L full flush/3L half flush

Front View

End View

Water Connection:

15mm BSP connection

Waste Connection:

P-S adaptor supplied

Sold Separately

Unit Fixing:

The unit has holes for fixing to floor and wall. A Z-clip is supplied to secure the front of the base to the floor when unit is pushed to wall

Toilet Seat Options:

Model No.

L x D x H (mm)

CMPL.0814

CMPL.0915

CMPL.1005

TP.CC1.A

367 x 650 x 1040

Inlet Height Outlet Height

Waste Set-Out Bend

~ 175 Plastec Universal Pan Bend

420 ± 3

251 ± 3

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: Revision: 4 - 16/06/23 16/06/2023 B -

2-11

2-12

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Close Coupled Toilet Suite - Access Compliant

Model: SPPL.TP.CC2.D SPPL

Features and Benefits: • Smooth hydraulically formed radius to outer and inner edges provide safety and user comfort • Formed stainless seat provides superior comfort, hygiene and strength • Optional vandal re s istant Thermoplastic seat can be added (refer below) • Secure flushing device access cover fastened with Torx security screws • Engineered flushing rim prevents hiding of contraband while allowing free flow of flush water • Stainless steel construction provides superior strength, superior hygiene and long service life • Optional 316 grade stainless steel suitable for highly corrosive and coastal environments • Powder coated to colour of choice optional • Access compliant, back rest included

= Stoddart Plumbing Product

= Toilet Pan

CC2

= Close Coupled

D = Disabled Access eg.: for specification and ordering quote Code: SPPL.TP.CC2.D

367

100

Rear View

Plan View

800

321

150

Specifications: Construction:

2mm thick, 304 stainless steel no.4 satin finish

269

Flushing:

WELS approved 4.5L full flush/3L half flush

Water Connection:

15mm BSP connection

Front View

End View

Waste Connection:

P-S Q bend adaptor supplied

Unit Fixing:

The unit has holes for fixing to floor and wall. A Z-clip is supplied to secure the front of the base to the floor when unit is pushed to wall

Sold Separately

Toilet Seat Options:

Model No.

L x D x H (mm)

TP.CC2.D

367 x 800 x 1067

CMPL.0814

CMPL.0915

CMPL.1005

Inlet Height Outlet Height

Waste Set-Out

~ 195 Standard Bend (not supplied)

420 ± 3

251 ± 3

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 16/06/2023 B - Revision:

19/01/2023 - 03

2-11

2-12

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Toilet Pan - Long Drop

Model: SPPL.TP.3.LD SPPL

Features and Benefits: • Standard unit has 2mm stainless steel shroud and formed seat for superior hygiene and strength • Optional 316 grade stainless steel suitable for highly corrosive and coastal environments • Base flange allows for easy fastening into place on most floor surfaces • Plumbing and fixing points are concealed for security and vandal resistance with access to plumbing via side access panel • Seat has smooth hydraulically formed radius to both outer and inner edges for safety and comfort and has a self draining seat surface for improved hygiene • Supplied as access compliant height and length to comply with AS1428

= Stoddart Plumbing Product

= Toilet Pan

= Type 3

= Long Drop

xx = XT = 250mm Long Extension eg.: for specification and ordering quote Code: SPPL.TP.3.LD

367

Plan View

800

206

516 to CL of cut in Floor

295

505

Optional 250mm long outlet extension

Specifications: Construction:

190

Toilet bowl – 304 bright stainless steel. Seat, body and shroud – 2mm 304 stainless steel no.4 satin finish. Designed to be fixed to the rear wall and floor internally or fastened to the floor externally through the base

Front View

End View

Unit Fixing:

Sold Separately

Toilet Seat Options:

Model No.

L x D x H (mm)

SPPL.TP.3.LD

367 x 800 x 530

SPPL.TP.3.LD.XT

367 x 800 x 780

CMPL.0814

CMPL.0915

CMPL.1005

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: www.stoddart.com.au www.stoddart.co.nz Revision: B3 - 16/06/2023 16/06/2023 B -

2-13

TOILETS

Toilet and Basin Security Combination Unit - Round

Model: SPPL.TP.CR.www.x.yyy.zz SPPL = Stoddart Plumbing Product TP = Toilet Pan CR = Combination, Round www = C90 = Pan centered 90 off wall = R45 = Pan offset right 45 off wall x = T = Toilet roll holder yyy = BSA = both sides access panel = RA = rear duct access zz = ED = electronic dual flush = ES = electronic single flush = ER = electronic, remote eg.: for specification and ordering quote Code: SPPL.TP.CR.C90.T.RA.ED

Features and Benefits: •

2mm stainless steel shroud for superior strength

• •

3mm extra heavy duty spec optional

Concealed plumbing and fixings for vandal resistance

• Toilet pan seat has an anti-contraband flushing rim for effective cell inspection • Seat is profiled for user comfort, improved hygiene and safety • All external corners are rounded with a smooth radius for improved safety • Basin has an integrated soap holder and cell-safe security drain • Low profile, domed bubbler and wedge. Providing improved anti-ligature safety while controlling water flow for hand washing and drinking to 1.5L/min • Electronic Piezo buttons and flow controller can easily be interfaced to water management system • Electronic (single or dual) flush and electronic bubbler activation provides maximum security • Optional toilet roll holder can be integrated in • Rear access option is preferred for high security prisons and detention centres

NOTE: For additional variations please contact your Stoddart representative

460

Plan View

Rear View

800

Specifications: Construction:

Optional integrated toilet roll holder

2mm thick, 304 stainless steel no.4 satin finish

Flushing:

Flush valve installation should have water pressure regulated between 250kPa and 500kPa and have a flow rate between 1.2 and 1.5 L/s to the valve face 25mm mains connection to flush valve. 15mm main connection to basin valve P trap standard, 95mm OD stainless steel spigot with rubber coupling included to suit 100mm PVC or copper sewer pipe. 40mm threaded basin connection to suit PVC trap. The unit is designed to be fixed to both the floor and the rear wall. Z clip provides easy floor fixing.

Water Connection:

Waste Connection:

End View

Front View

Unit Fixing:

Model No.

L x D x H (mm)

SPPL.TP.CR

460 x 800 x 1050

Inlet Height

Outlet Height

357

191 ± 3

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 16/06/2023 Revision: 19/04/2021 B - B -

2-14

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Toilet and Basin Security Combination Unit - Square

Model: SPPL.TP.CS.x.yyy.zz SPPL = Stoddart Plumbing Product TP = Toilet Pan CS = Combination, Square x = T = Toilet roll holder yyy = FA = Front access = RA = Rear duct access zz = ED = Electronic dual flush = ES = Electronic single flush = ER = Electronic, remote eg.: for specification and ordering quote Code: SPPL.TP.CS.T.RA.ED

Features and Benefits: •

2mm stainless steel shroud for superior strength

• •

3mm extra heavy duty spec optional

Concealed plumbing and fixings for vandal resistance

• inspection and is profiled for user comfort, improved hygiene and safety • All external corners are rounded with a smooth radius for improved safety • Basin has a cell-safe security drain • Low profile, domed bubbler and wedge. Providing improved anti-ligature safety while controlling water flow for hand washing and drinking to 2L/min • Water conserving security bubbler controls water flow for hand washing and drinking to 1.5L/min • Low profile, domed bubbler and wedge provides improved ligature resistant • Electronic Piezo buttons and flow controller can easily be interfaced to water management control. Buttons can be positioned in the body or remote from the unit • Electronic (single or dual) flush and electronic bubbler activation provides maximum security • Optional toilet roll holder can be integrated into front or side panel • Rear access option is preferred for high security prisons and detention centres

NOTE: For additional variations please contact your Stoddart representative

430

Plan View

Rear View

Specifications: Construction:

2mm thick, 304 stainless steel no.4 satin finish

460

415

Flushing:

250

Water Connection:

Access Panel

Waste Connection:

Unit Fixing:

End View

Front View

Model No.

L x D x H (mm)

SPPL.TP.CS

430 x 875 x 1050

Inlet Height

Outlet Height

360

191 ± 3

The more stars the more water efficient

WATER RATING www.waterrating.gov.au 3.3 litres per flush

In accordance with AS/NZS 6400

Licence No. 0196 Registered to Tom Stoddart Pty Ltd

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: Revision: B - 16/05/2023 16/06/2023

2-15

www.stoddart.com.au www.stoddart.co.nz

TOILETS

Contraband Control Inspection Unit

Model: SPPL.CA.CT SPPL

Features and Benefits: • Economical and affordable solution for institutions, border protection and customs • Large perforated stainless steel basket to capture flushed contraband • Customs toilet inspection unit has access doors on both sides • Customs Officers can easily inspect contents through large sealed glass window • Angled sealed glass window to ensure constant clear viewing • Fixed shower rose allows majority of washing to occur without operator interaction • High quality spray rinse unit allows thorough cleaning of found contraband • Large access gloves are sealed to unit for ease of use and need periodic replacement • Access gloves are positioned ergonomically for operator to kneel in front of unit and access spray rinse unit • Pan, cistern and basin - supplied separately

= Stoddart Plumbing Product

CA CT

= Cabinet

= Contraband Inspection Unit eg.: for specification and ordering quote Code: SPPL.CA.CT

1/2" BSB Male Inlet Connection 300 CL

238

101.6 S/S Tube - Toilet Inlet.

38 S/S Tube - Basin Inlet

Plan View

Rear View

Specifications: Construction:

1.5mm thick, 304 stainless steel, no.4 satin finish welded construction with quality rubber seals and laminated glass inspection window. 15mm water connection is required with an anti-syphon, non-return valve if water is supplied from mains. Supply should have a tap isolation valve that is easily accessible for the operator. 100mm rubber coupling connection from 100mm toilet outlet pipe. 40mm rubber coupling connection from basin outlet pipe. Use Rubber coupling to suit connection to 100mm sewer pipe. (eg: fernco) must be trapped in floor. Customs toilet stands on 4 adjustable feet. These can be screw fixed to floor if required.

450

600

Water Connection:

Access Panel to both sides

Inlet from Pan and Basin:

Outlet to sewer:

101.6 S/S Tube Waste Outlet

CL 175

Unit Fixing:

End View

Front View

Model No.

L x D x H (mm)

SPPL.CA.CT

600 x 450 x 850

Outlet Height

Waste Set-Out Bend

~ 175

163 ± 3

Due to continuous product research and development, the information contained herein is subject to change without notice.

Revision: 16/06/2023 Revision: 19/04/2021 A - A -

2-16

www.stoddart.com.au www.stoddart.co.nz

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137

www.stoddart.com.au

Made with FlippingBook - Online Brochure Maker