COMMERCIAL SINKS
Tilt Wall Cleaners Sink
Model: SPPL.CS.06.PG.xx SPPL
Features and Benefits: • Safe cleaning solution for commercial buildings, where wall penetration is not an option • Optional front legs can be ordered if unit is to be mounted on non-structural walls • Welded stainless steel grate has six bars for stable support of buckets while filling and draining • Highly polished, 44L capacity bowl is 235mm deep to reduce splashing • Safe and durable hinges allowing grate to be lifted for access to bowl • Sound suppression pad under base of bowl reduces noise • Rolled edges for added safety • 90mm waste comes with a waste basket for catching solids • Supplied tapware is WELS and Watermark approved
= Stoddart Plumbing Product
CS
= Cleaners Sink
06.PG
= Boxed Splashback with Taps
xx = FL = Front legs eg.: for specification and ordering quote Code: SPPL.CS.06.PG.FL
600
560
Joggle Angle to be fixed to wall. Splashback to hook over when fitting.
Plan View
102 102
SPPL.CS.06.PG.FL shown with Optional Front Legs
Specifications: Construction:
Pressed 304 grade bowl with 1.2mm 304 grade stainless splashback, no.4 satin finish
Waste Connection:
90mm supplied with basket waste
Front View
End View
Unit Fixing:
Unit is supplied with heavy duty, easy mount bracket. 600mm high Splashback with 50mm void for easy fitting of breaching piece behind, for walls with pipe work that cannot be recessed into. Recommended fixing height is 500-700mm from top of bowl to floor finished level. Legs are 650mm tall. Optional 650mm high front legs can be added at time of order.
Supplied Tapware
CMPL.0969
Model No.
L x D x H (mm)
SPPL.CS.06.PG
600 x 508 x 837
SPPL.CS.06.PG.FL
600 x 508 x 837 (1252 with legs)
Due to continuous product research and development, the information contained herein is subject to change without notice.
Revision:
A2-
7/04/2025
7-6
www.stoddart.com.au www.stoddart.co.nz
Made with FlippingBook - Online Brochure Maker