06 Double Sink Bowl
Product Information:
• Wet bench with two central fabricated bowls, available in 600mm or 700mm depth • 1.2mm thick 304 stainless steel top • Stainless steel top hat stiffening • 38mm diameter stainless steel tube legs, 1.2mm thick • 19mm diameter stainless steel tube under-shelf, 1.2mm thick • Adjustable stainless steel disk feet fitted as standard • 100mm splashback (600 series) or 150mm splashback with beveled edge (700 series) • Vermin proofing included behind upstand with pre-drilled holes for fixing bench to rear wall • Fully welded and polished bowls - 450 x 450 x 300 deep (60 litres, used on 1200, 1500, 1800 & 2100 models) 600 x 450 x 300 deep (81 litres, used on 2400 model) • 1800, 2100 & 2400 models supplied with six legs as standard • Pre-punched waste hole to suit 90mm waste, supplied with Watermark approved commercial grade basket arrestor sink waste • Supplied flat packed ready for assembly
General Drawing:
600 / 1200 / 1500 / 1800 / 2100
600
700
100
Ø38
SINK 600 x 450 x 300mm
SINK 600 x 450 x 300mm
526
626
ADJUSTABLE STAINLESS FEET
37
FRONT ELEVATION
SIDE ELEVATION
Specifications Product Code W x D x H (mm)
Unit Weight (Kg)
Load Capacity (Kg)
SS06.1200 SS06.1500 SS06.1800 SS06.2100 SS06.2400 SS01.7.1200 SS01.7.1500 SS01.7.1800 SS01.7.2100 SS01.7.2400
1200 x 600 x 900 1500 x 600 x 900 1800 x 600 x 900 2100 x 600 x 900 2400 x 600 x 900 1200 x 700 x 900 1500 x 700 x 900 1800 x 700 x 900 2100 x 700 x 900 2400 x 700 x 900
37 42 49 51 57 40 45 54 58 63
80 80
120 160 160
80 80
120 160 160
Due to continuous product research and development, the information contained herein is subject to change without notice.
11- 6
Revision: A - 07/04/2025
www.stoddart.com.au www.stoddart.co.nz
Made with FlippingBook - Online Brochure Maker