BRICKS
the 108m rowlock bond pattern around the edges of The Junction building. The bolt-up installation required a 215mm brick soffit to achieve the architect’s vision for the exposed brick soffit canopy detail. As the excessive loads exerted through the outer leaf exceeded the capacity of masonry support, the angle supporting the suspended brickwork was designed and manufactured as structural steel. Pistol bricks were required for the second course of brick to accommodate the structural steel elements, ensuring the angle was fully concealed without affecting the bond pattern. IG Masonry Support further supplied a number of Brick Slip Lintels for large window openings throughout the development, achieving impressive spans up to 3820mm. THE SOLUTION The patented B.O.S.S. gives the impression of a floating façade of brickwork, enabling a seamless, continuous soffit detail around The Junction’s perimeter. The system was bolted to the structural steel angle that was installed, in order to support the suspended upper level of brickwork. The B.O.S.S. is manufactured offsite in quality-controlled conditions. On this project, it was manufactured in specific components, allowing the contractor to lift and position the units by hand. This process negates the need for any specialist lifting equipment. Once aligned and levelled, the B.O.S.S. units were torqued up and secured. IG Masonry Support’s Thermal Shims were inserted for two crucial reasons: to provide a thermal break between the steel elements and to make fine adjustments while fixing each unit into position. Utilising this patented offsite solution meant the same quality finish was ensured every time. In this regard, traditional methods would have fallen short in achieving this architectural detail. IG Masonry Support’s innovative B.O.S.S. enabled the contractor to install 27 metres of product in under two hours. Furthermore, the B.O.S.S. requires no propping, saving further time in constructing the outer leaf brickwork. Both instances perfectly demonstrate the effectiveness of prefabrication in modern construction. A stunning building that lies at the heart of its community, the presence of IG Masonry Support’s solutions will ensure The Junction serves the people and visitors of Dungannon for years to come. For more information, contact IG Masonry Support by emailing info@igmss.co.uk or call 028 8676 0334
“The patented B.O.S.S. gives the impression of a floating façade of
brickwork, enabling a seamless, continuous soffit detail aroundThe Junction’s perimeter.”
www.northernbuilder.co.uk
FOLLOW US ON:
NI BUILDER | 77
Made with FlippingBook - professional solution for displaying marketing and sales documents online