Southbend_Electric Broiler_HDEB-24

Job:

Item#

24 ” Upright Electric Broiler CounterTop Designed for smaller foot print Compact variation of our World Renown Free Standing Broilers

 HDEB-24 Standard Features • Stainless steel construction • 6 kW ceramic infrared heating elements • 30 minute preheat with no waiting between loads • Roll-out broiling area is 16” wide and 26-1/2” deep, with a reduced heat holding area in the front 3” • Rugged grid height adjustment mechanism with five positions • Removable grids with a round pattern for branding • Fully insulated lining and burner boxes • Counter mount base for use with legs or mount on stand • (1) year limited parts and labor warranty (reference http://www.southbendnc.com/service.html for limited warranty details)

OPTIONS & ACCESSORIES AT ADDITIONAL COST

 Stainless steel stand

 Casters - 4” with front two casters lock

STANDARD CONSTRUCTION SPECIFICATIONS

Broiler Grid: Roll-out broiler grid is 16” wide and 26 1/2” deep (rolls out to 17-1/4”), with five height positions. The front 3” receive less heat so can be used as a holding area. Legs: Stainless steel 4” adjustable legs standard.

Exterior Finish: All exterior panels are 316L stainless steel #3 polish. Interior Finish: 316L stainless steel interior Broiler: 6 kW per deck ceramic infrared burners with separate controls. Wired 208/240V, 60 cycle in single or three phase.

Approval Notes: ________________________________ _____________________________________________ _____________________________________________

Form HDEB Rev 0 (December/2022)

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526 (919) 762-1000 www.southbendnc.com

Printed in USA Date:____________

Models:

 HDEB-24

DImensions shown in inches and (millimeters)

2.00 [51]

38.30 [973]

43.48 [1104]

36.92 [938]

48.25 [1226]

45.26 [1150]

24.58 [624]

14.91 [379]

6.33 [161]

31.76 [807]

DIMENSIONS & WEIGHT

Shipping Crate Dimensions & Weight

Model

Width Height

Depth

Volume

Weight

37.5” (952.5)

60” (1524)

55” (1397)

71.6 cu ft (2.02 cu m)

432 lbs (195.9 kg)

HDEB-24

Dimensions shown in inches and (millimeters)

UTILITY INFORMATION

ELECTRICITY: Electric models must install power cord for 208/240V, 60 Hz single or three-phase. Appropriate circuit protection is the responsibility of the owner.

Electrical Data

Model

3 Phase

Model

Voltage 1 Phase

X

Y

Z

HDEB-24 6 kW Heating Elements and Controls

208V, 60 Hz 240V, 60 Hz

29 25

17 14

17 14

17 14

MISCELLANEOUS

NOTICE: Southbend has a policy of continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

• If casters are used with flex hose, a restraining device should be used to eliminate undue strain on the flex hose. • Minimum clearance from noncombustible construction is zero. Minimum clearance from combustible construction is 10” on sides and 6” on rear. • Install under vented hood. • Check local codes for fire and sanitary regulations.

INTENDED FOR COMMERCIAL USE ONLY. NOT FOR HOUSEHOLD USE .

Form HDEB Rev 0 (December/2022)

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526 (919) 762-1000 www.southbendnc.com

Printed in USA Date:____________

Page 1 Page 2

don.com

Made with FlippingBook Publishing Software