IN-STOCK with calibration available Transcat.com/megger View the entire line:
MIT515, MIT525, MIT1025 & MIT1525 5 kV, 10 kV, 15 kV DC Insulation Resistance Testers w/ Data Storage
MIT400/2 Series CAT IV Insulation Testers Replacing the original MIT400 instruments, the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access.
Smaller and lighter than previous models yet offer advanced features and rapid charge capability.
MIT1525
MIT1025
· MIT1525 – 15 kV Testing Enables Measurement of Motors and
· High-Quality, Flexible Silicon Test Leads Meet Safety Regulations of IEC 61010-31:2008 While Ensuring Measurement Accuracy · Timed IR Plus PI, DAR, DD, SV and Ramp Tests Maximize Diagnostic Testing Capability
· Designed for Electrical and Industrial Testing · Insulation Testing Up to 1000 V and 200 G Ω Range · Stabilized Insulation Test Voltage · Single Range, Faster Continuity Testing from 0.01 Ω to 1 M Ω · Adjustable Insulation Test Voltage from 10 V to 1000 V
· 600 V Trms AC and
DC Voltage Measurement · Test Result Storage and Bluetooth ® Downloading · Live Circuit Detection and Protection · Rechargeable Options for AC Power and Car Charging · CAT IV 600 V & IP54
Generators Above 34500 V and Equipment Rated Above 35 kV · High Measurement Range Enables Installation Testing and Long-Term Trending of Higher Value Apparatus · Smaller Size & Lighter Weight Allows
Easier Transport & Use without Compromising Performance
Megger’s new range of DC insulation testers MIT515, MIT525, MIT1025 and MIT1525 are targeted at original equipment manufacturers and industrial companies. The top of the range MIT1525 performs insulation resistance tests up to 15 kV with a 30 T Ω maximum resistance and an accuracy of ±5% to 3 T Ω . The MIT515 offers IR, DAR and PI functions but has no memory functionality. MIT525, MIT1025 and MIT1525 have a full suite of test modes as well as on-board memory and the ability to stream data/download data to a PC/laptop. Instrument productivity is a focus of the new MIT range which offers rapid charge batteries and operation from an AC source if the batteries are dead. Rapid charge batteries enable > 60 minutes testing after a 30 minute charge
The MIT400/2 Series insulation and continuity testers are designed for electrical and industrial testing. In addition, they have an exceptionally wide range of applications in electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. Insulation testing has been enhanced with feedback controlled test voltages to limit over- voltage to 2%, rather than the industry standard 10-20%. A variable range has been added to allow any intermediate voltage from 10 V to 1000 V in 1 V steps, where application specific test voltages are required that do not appear in the standard ranges
ORDER # DESCRIPTION
PRICE
ORDER # MIT515 MIT525 MIT1025 MIT1525
DESCRIPTION
PRICE $3,695 $4,825 $5,850 $6,465
5 kV Insulation Resistance Tester
$710 $825 $865
1004-731 MIT400/2 Insulation Tester, 250 V, 500 V & 1000 V
5 kV Insulation Resistance Tester USB/RS232 Output Capable
1004-735 MIT410/2 Insulation Tester, 50 V, 100 V, 250 V, 500 V & 1000 V + PI, DAR 1004-739 MIT420/2 Insulation Tester, 50 V, 100 V, 250 V, 500 V & 1000 V + PI, DAR + VAR and Result Storage 1004-740 MIT430/2 Insulation Tester, 50 V, 100 V, 250 V, 500 V & 1000 V + PI + DAR + VAR + Bluetooth Download
10 kV Insulation Resistance Tester 15 kV Insulation Resistance Tester
$995
MIT1025-RENT1
MIT1025 Rental Unit - Call for Weekly & Monthly Rates
CALL $189
ED1618-3
★ Recommended Transcat Calibration
ED1618-2
★ Transcat Calibration
$189
Use Our Dedicated Hotline for Your Megger Needs: 800-233-8918
Transcat.com | 800-588-0951
32
Made with FlippingBook Digital Publishing Software