Amphenol Socapex │ PCB CONNECTORS │ HDB 3 /HSB 3
LOCKING
HDB3 STACKER CONNECTOR
Mother board side: optional locking guide pins • 2 locking guide pins per connector • The pin directly mate to the hole localized on the mated side • 3 sizes (6,35 [.25];12,7 [.50];19,05 [.75]) • Have to be ordered separately
HDB-508808-020
HDB-508808-021
HDB-508808-022
STANDARD HDB3 MB SHOWN WITH OPTIONAL LOCKING GUIDE PINS
STANDARD HDB3 MB CONNECTOR WITH OPTIONAL GUIDE PINS
I/O Connector locked to mother board connector
MATING MOTHER BOARD CONNECTOR
ASSEMBLED INPUT/OUTPUT CONNECTOR
FRONT HALF INPUT/OUTPUT CONNECTOR
REAR HALF INPUT/OUTPUT CONNECTOR
2
THREADED BOSS (2 REQUIRED FOR MOTHER BOARD CONNECTOR SEE HARDWARE ON PAGE 59)
2 LOCKING SCREWS SUPPLIED
1
REMOVABLE CRIMP CONTACTS FOR SIZE 22 THRU 28 GAGE WIRE
1
Supplied with I/O connector
I/O side • 2 jackscrews per connector
2-56 THREAD LOCKING SCREW SUPPLIED
• Mate to threaded boss for mother board • Locking screws supplied with I/O connector
PIN 1
2
HDB-508808-001 C
HDB-508808-002
HDB-508808-003
Mother board side • 2 threaded boss per connector • Required with mother board only when mating to I/O connector • Mate to I/O jackscrews • 3 sizes (6,35 [.25];12,7 [.50];19,05 [.75]) • Have to be ordered separately
A
.350
All dimensions are given for information only and are in mm [inch], except as otherwise specified │ *in mm: 1mm=0.03937 inch
Amphenol SOCAPEX
Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex
74
Made with FlippingBook HTML5