Bespoke Trays
Elements Wetrooms
SQUARE, LINEAR or INFINITY DRAIN OPTIONS
DRAIN TYPE AND LOCATION: The choice is yours! Select the drain type you prefer, whether square, Linear 300, Linear 600, Linear Uno or Infinity and then decide on the location of the drain within the tray area. Check our handy guide below on drain placement:
Bespoke waste positions for Square Drains
NO DRAIN AREA Centre of drain cannot be positioned within the grey area shown - 250mm from wall. PERIMETER AREA Drain centre can be positioned anywhere within the orange area shown CENTRAL AREA In order to facilitate sufficient falls, the maximum distance from tray edge to drain centre is 1350mm. e.g. for a 1790mm length tray, subtract 1350mm from 1790mm to get a 440mm minimum area from tray edge to drain centre. NO DRAIN AREA Centre of drain cannot be positioned within the grey area shown - 200mm from wall. PERIMETER AREA Drain centre can be positioned anywhere within the orange area shown CENTRAL AREA In order to facilitate sufficient falls, the maximum distance from tray edge to drain centre is 1350mm. e.g. for a 1790mm length tray, subtract 1350mm from 1790mm to get a 440mm minimum area from tray edge to drain centre.
NO DRAIN AREA
PERIMETER AREA
CENTRAL AREA
SQUARE DRAIN
250mm
190mm
1350mm
1790mm
Bespoke waste positions for Linear Drains
NO DRAIN AREA
PERIMETER AREA
CENTRAL AREA
LINEAR DRAIN
200mm
240mm
1350mm
1790mm
69
Made with FlippingBook Ebook Creator