PRODUCT INFORMATION
EU and GB legislation requires manufacturers to display either the UKCA mark for Great Britain and a CE mark for the EU and Northern Ireland on their product or packaging. It is an offence to place a product on the relevant market without a UKCA for Great Britain or CE marking for the EU market. The manufacturer is legally responsible for ensuring that the product conforms to the requirements of both directives. The European Commission thus refers to the CE marking as a “Passport” which allows products to be freely circulated within the EU single market. The UKCA marking allows products to move freely within Great Britain. Often consumers will consider the UKCA and CE markings on a product as an indication of conformance to laid down minimum standards and therefore, a minimum level of safety which other products may lack. Both markings are often seen by consumers as a “Symbol of Safety.”
Important Shower Tray Information » It is up to the designer or installer to ensure that the tray and enclosure combination is arranged in such a way that water retention meets the customers needs. » The waste has the capacity to carry away 27L/Min. High powered systems may exceed this. Please check with the manufacturer. » Please ensure that the shower head is not positioned directly over the waste as this may restrict water flow rate. » Please ensure that the colour and size of shower tray are as per your order before installation. » You must inspect the product thoroughly before installation. Fitting the product is acceptance of quality. » The trays are handmade from natural material. Please allow for height variances due to manufacturing tolerances. » For open ended shower screens please consult your installer. » Shower trays must be fitted as per the fitting instruction. Deviation from the pre installation checks or fitting installation will void the guarantee. » When wet, the surface of the majority of shower trays will show an increase in the potential for slipping. This is particularly the case when soap, shampoo, bath oil etc. are used. It is important that designers, installers and users are aware of this. Cleaning » It is important to clean your MERLYN shower door after every use. » Wipe down all the glass and metal parts with a soft cloth. » Do not allow lime scale to build up in hard water areas. » Ensure that any residual water on the glass is removed after every use.
Great Britain Mark
Manufacturer: Merlyn Industries Limited, Unit 8,Purcellsinch Ind. Estate, Kilkenny, Ireland, R95 HP71 .
UK Distributor: Merlyn (a division of NGH L ), Ladyfield House, Station Rd, Wilmslow, Cheshire, SK9 1BU.
19
UKCA DOP: UKCATZ1.1 CE DOP: CETZ1.1 Product Code here (MER13)
PH
EU also including Northern Ireland Mark
EN 14428
CA/IR/DA
Important For bespoke sizes please provide overall measurements i.e. tile-to-tile or tile-to-outside edge of tray, all surfaces including trays, walls and floors, all angles and cut-outs etc. MERLYN accept no responsibility for any incorrect measurements and details provided by customers or retailers. Any order placed to correct the mistake is treated as a new order and will be charged as such. Merlyn do not accept any returns on any bespoke products. Important Shower Tray Information Although shower door and enclosure sizes are related to tray sizes it is important to note that most shower trays are tiled down to the rim, often over an “up-stand”. The finished installation space may be less than the nominal tray size. ARYSTO shower enclosures are made to suit this remaining space. The illustrated guide (diagrams on right of page) may be helpful in taking measurements to determine the shower door or enclosure size required. Dimensions given in this publication are in millimetres, are approximate and may vary with adjustment. They are subject to change without notice. Tray Ensure strong and secure joints between shower tray and walls, even in the event of floor settlement. Please supply floor plans, photos, site condition details and note anything that might obstruct the product. Special sizes cannot be cancelled once the order has been processed. Adjustment This is the min and max adjustment of the actual enclosure. Always ensure the outer most part of the enclosure frame is stepped in far enough from the edge of the tray so that the enclosure frame is sitting on a flat surface and can be sealed correctly. Some trays have larger rounded edges and may need a bigger step in. Ensure that the step in leaves adequate space for the product adjustment.
» Clean the glass regularly using soapy water. » Do not use abrasive products on any surfaces. » Install the enclosure in a well ventilated area.
» When cleaning your ARYSTO X do not direct a high pressure stream at the seals or at a point of overlap between 2 panels as some water may escape. Information and Maintenance Always read the instructions on the packaging. Chrome is vulnerable to acid attack and some strong household cleaners including strong disinfectants, denture cleaners, hair dyes, wine making chemicals and photographic chemicals may contain acid. These materials may have a varying effect on the surface from black spots/streaks (which cannot be removed) to pitting the surface. Contact with these materials should be avoided. ISO Certi cation MERLYN has implemented an Integrated Management System comprising of Quality Management, Environmental Management and Occupational Health and Safety Management. An Integrated Management System ensures the seamless integration of several different standards into a common system that meets the requirements of each of these standards. These certifications are proof of MERLYN credibility but also to instil confidence in our potential clients that Merlyn will keep its promises.
N.B. Take the measurements after the tray is installed and the walls are tiled.
Disposal and Recycling End of product life When the product reaches the end of its serviceable life it needs to be disposed of safely and brought to or collected by an approved authorised treatment facility. Batteries Used batteries need to be disposed of responsibly and not with your normal household waste. Please contact your local authority for information on recycling and safe disposal.
The ARYSTO collection is available from specialist retail showrooms only. Our dedicated and highly trained MERLYN Sales Team are waiting to provide all the professional assistance and advice needed to help you choose the right enclosure.
Due to our policy of continuous improvement we reserve the right to amend prices, specifications and designs without prior notice.
All material and illustrations included in this catalogue are the copyright of MERLYN Industries Ltd. and cannot be used without prior written permission and credit in any other advertisements, brochures, publication, correspondence, any medium what so ever whether written or electronic including the internet.
Measurement Guide
Actual “out of true” wall Plumb Line Adjustment required (only 10mm or 15mm allowed for)
Top
All Rights Reserved.
Middle
Bottom
Recycing Please be aware our cover is non recyclable. Remove cover before recycling the internal pages.
Diagram 1 Recess Location
Diagram 2 Corner Location
Diagram 3 Out of True Wall
Diagram 4 Wall Location
108
Made with FlippingBook interactive PDF creator