BESPOKE
Please note: measure & t prices will be provided by chosen retailer. For side panel units there are 2 install options availabe. Standard t is provided with a tape joint & top bracket whereas UV bond is a seamless joint which is UV bonded using adhesive cured by ultra violet light.
GM400 Notch-cut - UV bond
GM800 Standard top bracket
» We require 2 days for cancellation or re- booking of visits. Both surveys & installation cancellations will be charged outside of this notice period. Oversized Panels » Panels over 2.3m Height or 70kg are considered oversized. They will require extra care & handling on delivery so will incur an oversized delivery charge. » Oversized delivery for oversized units will be highlighted when sent back with layout for sign off after site survey. » N.B. We strongly recommend that you use a MERLYN recognised Surveyor and Fitter. CAD or scaled drawings are required especially for sloping panels and panels with dwarf walls. All drawings need to be signed off.
Arysto Bespoke Product Pricing » Before we are able to survey your site, your shower tray must be fully installed and all wall tiles finished. » It is essential due to the weight of the glass that there is sufficient grounds for fixing all hinges and brackets to all walls and ceilings where appropriate. » Cost of the installation may increase due to: weight of the glass panels, increase size of the glass panels or restricted access to site. » Satin glass is satin on one side only. If the satin side gets wet the glass will become transparent
Survey & Fitting Service » We will visit your home to discuss design options, preferences & advise bespoke options available. » Your bespoke shower enclosure will be manufactured to the precise measurements taken, while keeping in mind your discussed design needs, to ensure that we provide the best possible solution for you. » Units over 2000mm high may require a two man install charge which will be highlighted after site survey. Terms & Conditions » A decision maker must be present at both survey & installation for confirmation & sign off of specification of the MERLYN bespoke unit.
ADDITIONAL COMPONENTS
Maximum gap to ceiling when used = 30mm, Total height 50mm, total overlap on glass = 44mm
Ceiling brackets
1 INC
Standard towel rail - Chrome Only
130
Shelf - Chrome Only
120
Material: Gel coated stone resin. Size: 350mm wide x 55mm high. Recommend 450mm from the ground / tray. Min width = 800mm and max width is 900mm. Static (not drop) weight tested to 500KG 290
Seat - Chrome Only
Pro les
Standard Wall
1 INC
Recessed Floor
1 INC
Recessed Wall
1 INC
Standard Wetroom Floor
1 INC
Please contact Bespoke for pricing: Phone: 0808 1011 429 Email: bespoke@merlyn.ie
58
Made with FlippingBook interactive PDF creator