ShelterPro® Chimney Systems Product Guide

ShelterPro Pellet Pipe

ShelterPro Pellet Pipe

ShelterPro gives you the safe, efficient, and cost-effective venting system that’s engineered precisely for pellet burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters’ Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. VP Pellet Pipe, when installed according to ShelterPro’s installation instructions, complies with National Safety Standards, such as NFPA 211. The system is rated for flue temperatures up to 570°F.

• Available in 3” and 4” diameters • Full line of fittings and full range of pipe lengths increase installation flexibility • Proven coupling joint connects in seconds to assure joint integrity • Gasketed joint design • Painted pipe lengths available for interior use • Double wall design with 1/4” airspace

• Inner wall 304 stainless steel, outer wall paintable galvanized steel • Rolled-over male end eliminates sharp edges • 1” clearance to combustibles • Removable tee cap for inspection and cleaning • Internal spacing bead assures uniform insulating airspace between pipe walls

Pellet Pipe Lengths: available in both 3” and 4” diameters and in the following lengths Part Number Description Length in inches *VP-12 12” Pellet Stove Pipe 12 *VP-24 24” Pellet Stove Pipe 24 *VP-36 36” Pellet Stove Pipe 36 *VP-EZADJ12 Adj. Pellet Stove Pipe adj



Pellet Pipe Tee Part Number Description *VP-TSB

Insulated Tee with Cap - Black

Elbow Part Number Description *VP-45EL

45° Elbow, factory sealed at couplers to prevent leakage 90° Elbow, factory sealed at couplers to prevent leakage




* Both 3” and 4” available. Insert 3 or 4 in place of * for the part number.


10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

Made with FlippingBook - professional solution for displaying marketing and sales documents online