36 D
PIPE STRETCHER KIT
For more information, visit... POWERTEAM.COM
FREE FENDER COVER
POSI LOCK MANUAL PULLERS
Collet sets expand pipes from 1-5/8”to 4-1/4”. A convenient, inexpensive alternative to hydraulic pipe expanders. Comes in a molded storage case. Expands all types of exhaust pipe, including stainless steel, from 1-5/8” to 4-1/4” in size. LIS-17350...................... $291.59
106
$35.00 VALUE LIS-89880
Ease of use is a priority when using any puller. With Posi Lock manual pullers, opening, closing, locking, and aligning the jaws happen simultaneously when you turn the T-handle.
Model
Capacity 2 Tons 5 Tons 10 Tons 17 Tons 20 Tons
Jaws
Reach
Spread
Price
MTI-103 MTI-104 MTI-106 MTI-108 MTI-110
$136.59 $210.59 $277.89 $353.79 $389.95
3 3 3 3 3
3” 4” 6” 8”
.25 to 4.5”
.5 to 5” .5 to 7”
• Small Expander: 1-1/8” to 1-3/4” • Medium Expander: 1-1/2” to 2-1/2” • Large Expander: 2-1/8” to 3-1/2” • (3) Spare sets of rubber O-rings EXHAUST PIPE CUTTER PLIERS 3 PC. TAILPIPE EXPANDER SET $63.29 ATD-5723 • Cuts pipe from 3/4” to 3-1/4” (19mm to 83mm) in diameter • Warranty does not cover normal dulling of cutting wheels from repeated use - replacement cutting chain PRT5721-01 available for purchase ATD-5721................................ $44.59
.75 to 12”
9.67”
1 to 15”
Transmission bearing removal takes minutes, not hours when using PTTJ-1 or PTTJ-2 pullers. Specially machined jaws that clamp in snap-ring grooves as narrow as .070” (1.8mm) TRANSMISSION BEARING PULLERS
Model
Jaw Width
Jaws
Reach 9.25” 5.25”
Spread
Price
MTI-PTTJ-1 MTI-PTTJ-2
2.75 to 14.75” $295.99
1”
2 3
PTTJ-1
$257.95
.75”
1 to 6.75”
HARMONIC BALANCER INSTALLER KIT
LATE MODEL HARMONIC DAMPENER PULLER & HOLDING TOOL SET • Remove dampener pulleys on late model vehicles without removing the radiator • Use on the following: • 1995+ Ford V8 • 2000+ GM 4.8L, 5.3L, 6.0L & 8.1L V8 • 1997+ GM 5.7l V8 • 1988+ Cadillac 4.5L, 4.6L & 4.9L V8 • 2004+ GM 3.5L I5 • 2005+ GM 2.8L I4 • 1995+ Olds 4.0L V8 • 1990+ Chrysler 2.0L & 2.4L I4 • 2003+ GM 4.2L I6 • 1995+ Mitsubishi 2.0L • 1990+ Chrysler 2.5L, 2.7L, 3.3L, 3.5L and 3.8L V6 HARMONIC BALANCER PULLER SET This kit includes a standard harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a harmonic damper pulley puller for Chrysler, GM, Mitsubishi and Dodge. Includes new interchangeable puller jaws for 3.6L V6 Chevy Camaro and Dodge 5.7L Hemi. ATD-3039................................. $147.29 Set includes driving screw, thrust bearing and 13 threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers. Five long adapters for use on Dodge Hemi, generation III and IV GM motors, some Chrysler and some Ford including 3.5L and 4.0L. The 1.75” spacer allows the tool to work more harmonic balancers. LIS-53790................................ $214.39
NO SLIP PULLEY PULLER AND INSTALLER SET • Removes and installs pressed on power steering, alternator and air pump pulleys without slipping • Fits most domestic models including GM 3.1 and Quad 4 engines • Works on traditional V shaped pulleys and serpentine belt system pulley
LIS-39000.................................. $80.59
ALTERNATOR/POWER STEERING PULLEY PULLER & INSTALLER
• Removes pressed-on alternator and power steering pulleys on late model GM (including Quad 4), Ford and Chrysler engines as well as some AMC vehicles • Reverse the jaws to pull the alternator internal bearing • Will not work on 3.3L and 3.5L Chrysler engines ATD-3052................................ $63.19
• 8 function internal or external 3-jaw puller • 5 lbs. heavy-duty hammer • Internal or external 2-jaw puller SLIDE HAMMER PULLER SET
• Puller hook, rear axle puller • Special grip wrench adapter • 5/8”x 18 threaded end
14-PC. SLIDE HAMMER & PULLER SET ATD-3045.............................. $139.39
• Autobody dent puller attachments • 2 lbs slide hammer
• 3/8-16” threaded slide screw • Maximum reach of 2-1/2”
MTI-49700.............................. $85.09
• Jaws are reversible to make four other pullers • 8-way, 2- or 3-jaw reversible pullers • Ideal for pulling smaller gears, bearings, pulleys and other press fit parts REVERSIBLE JAW PULLER ATD-3041................................... $44.99 • Heavy-duty, flange-type puller easily pulls harmonic balancers, timing gears and other parts with bolt circle diameters from 1-1/2” to 4-5/8” • Works on most cars - large and small, foreign and domestic • Will pull parts with tapped holes like flywheels, gears and pulleys HARMONIC BALANCER PULLER SET LIS-54810................................ $257.29
LIS-39480
LIS-35070
LIS-37160
LIS-39200
LIS-35800
LIS-37450
LIS-39850
ATD-3399
Number
Description
Max Reach
Max Spread
Max Screw Size
Price
ATD-3310
LIS-39100
ATD-3044
$70.29
LIS-39120
5 Ton, 2/3-Jaw Reversible Puller
5-1/2”
7”
9/16” -20 x 6-15/16”
5 TON STRAIGHT PULLER • Includes: 9” bar and (3) pairs of puller arms • More convenient than standard pullers • Versatile and easy to use • Puller arms slide back and forth on yoke to adjust
ATD-3310 FUEL LINE, A/C & AIR LINE DISCONNECT TOOLS & SETS Number Description/Contents
10 TON STRAIGHT PULLER • Includes: 10” bar and (4) pairs of puller arms ATD-3047. .................. $60.29 ATD-3048. ................ $199.49
Price
Master Disconnect Set - Clutch coupling remover for Ford; low profile 3/8” Jiffy-tite ® disc.; low profile 1/2” Jiffy-tite ® disc.; low profile fuel line disc. set; A/C fuel line disc. set; fuel & A/C disconnect pliers; fuel module disc. tool for GM; fuel line retaining clip tool set; main fuel line disc. for Toyota & Nissan; angled disc. set; trans. oil cooler line scissors 3/8” x 1/2”; hydraulic clutch line disc. for GM; coupler disc. for Chrysler; oil cooler line disc. for Ford; fuel line disc. for Ford; 5/16” x 3/8” scissor disc.; coupler disconnect; molded case. 15 Pc. Deluxe Disconnect Tool Set - Set includes tools for use on 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8”: fuel lines and filter; fuel pressure regulators; fuel return lines; A/C fittings; oil cooler lines; radiator cooler lines; trans. oil cooler lines & vehicle specific applications.
LIS-39850
$197.29
5 TON BAR-TYPE PULLER / BEARING SEPARATOR SET • 2” and 3” bearing separators • (4) sets hex push-puller legs • 5” puller cross bar with 6-1/4” forcing screw
ATD-3399
$51.59
LIS-37000 LIS-37160 LIS-37450 LIS-35800
$9.39
6 Pc. A/C Fuel Line Disconnect Set - 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8”
$23.99 $18.69 $89.99
Disconnect Pliers - Low profile with 85˚ bend. Works on Delphi two tab connectors and some import vehicles
ATD-3056. ............. $112.59
DEF Disconnect Set - Easy access to DEF fill & breather lines on 2012 and newer Ford Power Stroke & Dodge diesel
RATCHETING HARMONIC BALANCER PULLER Features:
6 Pc. Aluminum Disconnect Set - Disconnects work on air conditioning lines and quick connect fuel lines
13 Pc. Aluminum Spring Disconnect Set - Spring-loaded construction allows one-handed access to hard-to-reach, confined, and obstructed areas. Tools are marked for easy identification. Blow-molded case for storage. Low Profile Fuel Line Disconnect For Ford, 5/16” & 3/8” - Works on 5/16” & 3/8” fuel lines found in 2010 and newer Ford vehicles with 1.6L, 2.0L & 3.5 GTDI, and 6.2L Boss engines. Double ended tool is designed to fit the limited clearance between the fuel line and high pressure fuel pump. Made from durable, flexible acetal. 2 Pc. Ford Oil Cooler Spring Disconnect - Spring-loaded construction allows one-handed access to hard-to-reach, confined, and obstructed areas. Tools are marked for easy identification. Blow-molded case for storage.
$139.99
LIS-39480
• Eliminates the need to remove major engine components • Ratcheting function holds jaws in place during application • Ratcheting yoke has a 7-Ton pulling capacity Applications: • FORD – 4.6L, 5.0 Coyote, and 5.4L • GM – 5.3L, 5.7 (LS1), 6.0 (LS2), 6.2 (LS3) and 7.0 • MISC – Most 3 and 6 spoke harmonic balancers/pulleys
$95.99 ATD-3075
LIS-39120
$10.59
$31.89
LIS-39100
Made with FlippingBook flipbook maker