44 D
200-1145 Pressurized Induction Tool Features: • Helps you perform an effective induction service on direct or conventional fuel injected engines • Chemicals NOT included with tool and must be purchased separately Visit www.motorvac.com for more information PRESSURIZED INDUCTION TOOL KIT
MASTER FUEL INJECTION PRESSURE TEST KIT
MASTER GLOBAL FUEL INJECTION PRESSURE TEST KIT Covers all major model platforms, domestic and foreign, 1988 to present. Redesigned fuel line tee accommodates 3/8”,1/4” and 5/16” hose sizes. A longer tee adapter to cut test hoses for easier connections. Molded storage case. Gauge assembly disconnects from test hose and valve assembly for easier storage and improved gauge protection.
$527.59 ATD-5578
Tests both foreign and domestic fuel injection systems; includes late model GM, Chrysler and European applications; large 3-1/2” gauge with dual reading of 0–145 psi and 0–1000 kPa; allows checking for sufficient fuel flow; low pressure 2-1/2” gauge
$439.95 MOV-200-1145
ATD-5650................... $412.89
200-1145
LIGHT TRUCK COMPRESSION KIT Test compression on Dodge Cummins, Ford Power Stroke, GM Duramax and virtually every light duty diesel truck on the market!
DELUXE VACUUM/ FUEL PUMP TEST KIT
HD GLOBAL DIESEL COMPRESSION TEST SET 2-1/2” easy-to-read gauge; adapters for Cummins, Bedford, Case, Caterpillar ® , John Deere ® , Fiat Allis, Ford Tractor, GMC, Hino Trucks ™ , International and Navistar, Isuzu, Mack, Massey-Ferguson, Mercedes, Mitsubishi-Fuso, Onan, Scania, Volvo, Wisconsin and others. ATD-5682................$439.95 CUMMINS 5.9L DIESEL FUEL SYSTEM TEST KIT All adapters necessary for testing on Cummins Series B and ISB engines (including Dodge Ram). Adapters are individually labeled for easy identification. FORD POWER STROKE DIESEL FUEL SYSTEM TEST KIT For diesel fuel pressure testing on Ford Power Stroke engines 1994 to present. Includes a 100 psi gauge, a bleed off valve hose assembly, and all the adapters necessary to pressure test the fuel system on Power Stroke engines. MTI-TU32................$423.49 MTI-TU32-4PB........$363.89
(12) Compression Test Adapters included for the following applications: GM Diesel 4.3L, 5.7L, 6.2L, 6.5L, 6.6L; Cummins/Dodge 5.9L 12V & 24V; Ford/Navistar 7.3L, 6.0L, 6.4L, 6.7L, T444E, VT365; Sprinter/Mercedes 2.7L, 3.0L; VW, Mazda, Nissan-UD, Cat-Perkins, Kubota, Isuzu, Hino, Toyota; other engines utilizing M10 x 1.0, M1- x 1.25, M14 x 1.25, M 12 x 1.25 M8 x 1.0
2 ft. of high quality hose, (3) fittings to test domes- tic and foreign cars and trucks with gas engines; hook-on 3-1/2” compound gauge has a multi-color dual scale dial with ranges from 0–10 psi, 0–0.7kg/ cm 2 and 0–28inHg/0–70cmHg vacuum ATD-5657................. $37.89
BASIC FUEL INJECTION PRESSURE TESTER
UNIVERSAL COMPRESSION TESTER ATD-5685. ....$283.49
Tests most systems except Bosch CIS and GM TBI; 2-1/2” dual scale gauge reads 0–100 psi or 0–7 BAR; includes the necessary adapters, banjo bolts, and 16” gauge hose with quick coupler and adapter guide book ATD-5633................... $185.09
PROFESSIONAL COMPRESSION TEST KIT 2-3/4” gauge with high impact lens, rubber boot, (4) scales of measure (psi, kg/cm2, BAR, kPa), 10” long hose and quick release coupler; 14mm short-thread adapter with 6-1/2” and 12” hoses; 14mm long-thread adapter with 12” hose; 18mm short-thread adapter with 12” hose; Gas engine compression testing on domestic and foreign vehicles; screw-in adapters with O-rings; incudes 14mm and 18mm short-solid, 14mm and 18mm long-flex and 14mm long-reach adapters; long flex 12” hose and side release valve; 2-1/2” gauge has dual scale dial with ranges from 0–300 psi and 0–21 BAR ATD-5659..................$61.19
FUEL INJECTION PRESSURE TESTER Tests American Motors, Bosch, AFC, MPC European and Japanese (except CIS); basic fuel injection tester includes large and small Schrader adapters; M6-1.00 O-ring adapter and tee manifold Chrysler, Ford, GM (except TBI); Japanese and Bendix-type systems; 2-1/2” gauge has dual scale with ranges from 0–100 psi and 0–7 BAR
ATD-5567..................... $58.29
FUEL INJECTION CANISTER CLEANER
GM 6.6L DURAMAX DIESEL FUEL SYSTEM TEST KIT For diesel fuel pressure and vacuum testing on GM 6.6L Duramax engines. Gauge assembly with 6 ft. hose and quick coupler. 3-1/2” gauge reads 30 in Hg to 15 psi.
14mm short-thread x 18mm long-thread adapter; 10mm thread small engine adapter; field service kit; quick release air hold adapter; 12mm thread small engine adapter
Centrally mounted chain and S-hook provide better bal- ance during cleaning process; stainless steel braided Teflon ® hose; reduces potential damage by separating the gauges and manifold from the canister during filling; will restore the original spray pattern, giving improved perfor- mance, fuel economy and emissions test. MTI-TU470B............... $299.95
MIT-MV5530...........$107.19
COMPRESSION TEST KIT FOR GASOLINE ENGINES Test all major model vehicle platforms, domestic and foreign with gasoline engines, including mini engines. 2-1/2” gauge has dual scale with ranges from 0-300 psi and 0-21 BAR. Includes 24” hose assembly w/ quick coupler; M14 hose adapter w/ short thread; small engine tester; M14 hose adapter w/ long thread; M12 x M16 hose adapter; M10 adapter w/ short thread; M14 adapter extension ATD-5639................$161.49 Use with most standard compression test adapt- ers; easy-to-read pressure gauge has a dual scale dial with ranges from 1–100 psi and 0–7 BAR with a gauge boot for added protection; 2 gauge design allows for monitoring of input air line pressure to ensure accurate testing; uses shop air to determine leakage source CYLINDER LEAKAGE TESTER ATD-5573A........... $111.19
MTI-TU32-6.............$234.09
COMPUCHEK TESTER Used to check fuel system pressure on diesel engines with Com- puchek test ports. Fits Compuchek test ports on the fuel system of Cummins diesel engines as well as other diesel engines that have been outfitted with the Compuchek test ports. Consists of a hose assembly with a female Compuchek fitting on one end and a 3-1/2”, 300 psi gauge on the other.
FUEL INJECTION PRESSURE TESTER WITH SCHRADER ADAPTERS Tests all cars with standard or small Schrader valves; 3-1/2” gauge has a dual scale dial with ranges from 0–100 psi and 0–7 BAR; quick coupler connection at end of gauge hose
MTI-TU32-20...........$191.59
MTI-TU469................. $158.69
BASIC DIESEL FUEL PRESSURE TEST KIT
• Test oxygen sensor, exhaust pipes and injection system • Gauge has (2) multi-colored bands; idle and 2500 rpm, with pressure shown in psi and BAR • 6 ft. hose 3 WAY EXHAUST BACK PRESSURE KIT MTI-TU24APB............$132.79
Test Kit is used to test fuel pressure between the lift pump and the injection pump on diesel engines, and Can be used to test most diesel engines from single cylinder to V32 models. Includes: 100 PSI gauge assembly with 4-ft. hose, pressure relief valve 6-ft. clear PVC tube, 5 banjo bolt adapters ranging from 8mm to 14mm, 1 repair kit.
MTI-TU32-2.............$258.69
INJECTOR SEAL INSTALLER KIT, 8 PC.
DEF & FUEL LINE DISCONNECT SET Low profile compact design allows easy access to hard-to reach DEF, breather line, coolant line, and fuel line connectors found on most cars, truck and heavy- duty vehicles. 1/4” square drive allows use with a breaker bar or extension to reach into tight spaces. Kit comes with six sizes. Four sizes are used to compress connectors and two are used to spread connectors to remove the line.
INJECTOR RAIL FUEL LINE CAP SET, 5 PC. Helps in identification of faulty diesel fuel injectors and used to diagnose engine knock sounds. Install the cap on the fuel rail in the place of the injection line. When the cylinder with the failed injector is capped, the rail pressure will rise and the vehicle will start. Set comes with five different caps.
It also works on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the
cylinder head. Applications include: 2010 and later GM engines including 1.4L, 1.5L, 2.0L, 2.4L, 2.5L, 3.0L, 3.6L, 4.3L, 5.3L, and 6.2L. 2010-2017 GM 2.0L, 2.5L, 3.6L, 5.3L & 6.2L engines. 2014- 2019 Subaru 2.0L & 2.4L turbo engines. Ford Injectors 2011 and newer.
$33.39 LIS-38410
$88.79 LIS-10810
LIS-34720.................$66.69
Made with FlippingBook flipbook maker