Annuals Catalog 2020-2021 | North America

GROWER SUCCESS GUIDE | VEGETATIVE PROPAGATION

Petunia DEKKO ™ Petunia hybrida REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME

PINCH

PROP TIME BOTTOM HEAT

105–cell (30 mm) or larger.

URC, AutoStix ®

Not Recommended

CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2–3 days and after cuttings become fully hydrated. Not

3–3.5 Weeks 72–74 °F (22–23 °C)

Recommended

Comments: Dekko has moderate vigor and generally is not as vigorous as many full-trailing petunia types. To control growth after rooting, sprays of B-Nine ® WSG (2,500 ppm) are usually sufficient. A tank-mix spray of Florel ® (350 ppm) + B-Nine ® WSG (2,500 ppm) can also be used to control growth and improve branching. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.

Petunia ITSY ™ Petunia hybrida REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME

PINCH

PROP TIME BOTTOM HEAT

105–cell (30 mm) or larger.

URC, AutoStix ®

Not Recommended

CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2–3 days and after cuttings become fully hydrated. Not

3–3.5 Weeks 70–74 °F (21–23 °C)

Recommended

Comments: Itsy has moderate vigor and generally is not as vigorous as many full-trailing petunia types. To control growth after rooting, sprays of B-Nine ® WSG (2,500 ppm) are usually sufficient. A tank-mix spray of Florel ® (350 ppm) + B-Nine ® WSG (2,500 ppm) can also be used to control growth and improve branching. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.

Petunia SANGUNA ® Petunia hybrida REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME

PINCH

PROP TIME BOTTOM HEAT

105–cell (30 mm) or larger.

URC, AutoStix ®

Not Recommended

CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2–3 days and after cuttings become fully hydrated. Not

3–3.5 Weeks 72–74 °F (22–23 °C)

Recommended

Comments: Sanguna has good vigor and generally will need chemical growth regulation in propagation. To control growth after rooting, sprays of B-Nine ® WSG(2,500–3,500 ppm) are usually sufficient. A tank-mix spray of Florel ® (350 ppm) + B-Nine ® WSG (2,500 ppm) can also be used to control growth and improve branching. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.

Petunia SANGUNA ® PATIO Petunia hybrida REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME

PINCH

PROP TIME BOTTOM HEAT

105–cell (30 mm) or larger.

URC, AutoStix ®

Not Recommended

CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2–3 days and after cuttings become fully hydrated. Not

3–3.5 Weeks 72–74 °F (22–23 °C)

Recommended

Comments: Sanguna Patio has compact-medium vigor and generally will need only moderate amounts of chemical growth regulation in propagation. To control growth after rooting, sprays of B-Nine ® WSG (2,500 ppm) are usually sufficient. A tank-mix spray of Florel ® (350 ppm) + B-Nine ® WSG (2,500 ppm) can also be used to control growth and improve branching. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.

Petunia SHORTCAKE ™ Petunia hybrida REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME

PINCH

PROP TIME BOTTOM HEAT

105–cell (30 mm) or larger.

URC

Not Recommended

CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2–3 days and after cuttings become fully hydrated. Not

3–3.5 Weeks 70–74 °F (21–23 °C)

Recommended

Comments: Shortcake has moderate vigor and generally is not as vigorous as many full-trailing petunia types. To control growth after rooting, sprays of B-Nine ® WSG (2500–3500 ppm) are usually sufficient. A tank-mix spray of Florel ® (350 ppm) + B-Nine ® WSG (2500–3500 ppm) can also be used to control growth and improve branching. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.

Salvia VELOCITY ™ Salvia farinacea REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME

PINCH

PROP TIME BOTTOM HEAT

105–cell (30 mm) or larger.

URC, Pre-Pinched, AutoStix ®

Not Recommended

CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated.

Recommended 3.5–4 Weeks 70–74 °F (21–23 °C)

Comments: Velocity growth can be controlled in propagation using a tank mix spray of Cycocel ® (1,000 ppm) + B-Nine ® WSG (1,500 ppm). For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.

Scaevola BOMBAY ® Scaevola aemula REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME

PINCH

PROP TIME BOTTOM HEAT

105–cell (30 mm) or larger

URC, CC, AutoStix ®

Recommended

CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2–3 days and after cuttings become fully hydrated.

Recommended 4.5–5 Weeks 72–74 °F (22–23 °C)

Comments: To control growth after rooting, sprays of B-Nine ® WSG (1,500–2,500 ppm) are usually sufficient. A tank-mix spray of Florel ® (350–500 ppm) + B-Nine ® WSG (1,500 ppm) can also be used to control growth and improve branching. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.

276

Made with FlippingBook Learn more on our blog