Router
126
OF 1010 Accessories
$49.00
488752
Adapt routers to Guide Rails for perfectly guided cuts. Slot in base engages rib on Guide Rail. Guide Stop Quick and precise adjustment when using router with Guide Stop (488 752) or edging plate. Allows for 1/256” (1/10 mm) fine adjustment. Fine Adjustment Stable guidance for accurate grooves, flutes, dados, rabbets and more. Includes Guide Rods (495 247); does not include Dust Hood (437 307). Edge Guide Quick and precise adjustment when using router with Guide Stop (488 752) or Edging Plate. Allows for 1/256” (1/10 mm) fine adjustment. (Shown attached to Edge Guide (489 427), not included) Fine Adjuster Swiveling Chip Catcher deflects chips and dust in edge- forming operations, further enhancing dust extraction efficiency. Chip Catcher
$33.00
488754
$50.00
489427
$33.00
483358
$27.00
493180
Customize the solid base piece hole diameter with a plunge bit to meet your needs. Provides support across the entire surface of the router base. Ideal for working with smaller diameter bits especially for greater support on outside corners. Does not have the center bore. Hard Fiber Base Runner $31.00
489229
$33.00
483922
Rout circles and decorative curves up to 29-7/8” (760 mm) in diameter. Trammel Unit
8 mm collet with nut 1/4” collet with nut Collet
$46.00 $46.00
488761 488755
Template
$19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00
486029 484176 486030 486031 486032 486033 486034
13.8 mm OD / 11 mm ID 17 mm OD / 15 mm ID 24 mm OD / 21 mm ID 27 mm OD / 25 mm ID 30 mm OD / 27 mm ID 10.8 mm OD / 9 mm ID 40 mm OD / 37 mm ID
Includes: SYS 1 TL (497 563); LR 32 Hole Drilling Set (583 290); LR 32 Guide Rail Connector (496 938) (2 pieces); Dowel Drill HW D 5 mm—for stopped holes (491 066); Dowel Drill HW D 5 mm—for through holes (491 064); Cup Hinge Bit HW D 35 mm (491 077); Festool 120 Screw Clamps (489 570); Guide Rail sold separately. 584100 LR 32 Hole Drilling Set $555.00
$37.00
492187
Center guide bushings and the LR 32 plate to the collet for accurate routing results. Works with 1/4” and 8 mm collets. Centering Mandrel
Made with FlippingBook - Online catalogs