Router
130
OF 1400 Accessories
$62.00
492601
Adapt routers to Guide Rails for perfectly guided cuts. Slot in base engages rib on Guide Rail. Includes Router Support (438 608). Does not include Guide Rods (495 247). Guide Stop Quickly and easily rout grooves, flutes, dados, ploughs and rabbets with guided precision. Includes Dust Hood (489 565). Edge Guide Swiveling Chip Catcher deflects chips and dust in edge-forming operations, further enhancing dust extraction efficiency. Chip Catcher Accessory base for use with small diameter edge- forming bits. Provides stability on outside corners by extending the base to the inside near the bit. Base Oversized, heavy-duty baseplate with integrated rotating chip catcher. Increased hole diameter size for larger edge-forming bits. Increased base width for greater support. Aids starting and finishing cuts with extended base surface. Table Widener
492636
$105.00
$29.00
492732
$57.00
492574
$93.00
493233
1/4” collet with nut Collet
$52.00 $52.00
494463 494464
3/8” collet with nut
$52.00
494460
8 mm collet with nut
$54.00
494465
1/2” collet with nut
Template
$19.00
492183
24 mm OD / 21 mm ID
$19.00
492184
27 mm OD / 25 mm ID
$19.00
492185
30 mm OD / 27 mm ID
$19.00
492186
40 mm OD / 37 mm ID
Includes: SYS 1 TL (497 563); LR 32 Hole Drilling Set (583 290); LR 32 Guide Rail Connector (496 938) (2 pieces); Dowel Drill HW D 5 mm—for stopped holes (491 066); Dowel Drill HW D 5 mm—for through holes (491 064); Cup Hinge Bit HW D 35 mm (491 077); Festool 120 Screw Clamps (489 570); Guide Rail sold separately. 584100 LR 32 Hole Drilling Set $555.00
$37.00
492187
Center guide bushings and the LR 32 plate to the collet for accurate routing results. Works with 1/4” and 8 mm collets. Centering Mandrel
Made with FlippingBook - Online catalogs