F100 Ethernet
Inductive Coupling System
■ Stationary unit - Base ■ Mobile unit - Remote
Axial coupler
Base:
Base / Remote:
Base / Remote:
H
H1
C
H
H1
C
H
H
H1
H1
C
C
Remote:
Subject to technical changes. For more detailed information please ask our customer service.
Inductive coupling system F100 Ethernet
Base
Remote
Type Id. No.
0E011420
0E011421
A B C H
mm mm mm mm mm
100
50
13
10
25
H1
3
ɑ ß γ
27 35
degree degree degree
20 Al, GFK IP 67
Housing material Protection class
Function Base LED Power Color
Function Remote LED Power Color
Green / red
Green / red
Off » Unit not supplied with voltage (or undervoltage) On (green) » Voltage ok and mobile unit has been detected 2 Hz green 50 / 50% » Operating temperature in critical range 1 Hz green 25 / 75% » Voltage ok but no mobile unit detected 1 Hz red / green » Incompatible mobile unit detected 2 Hz red » Foreign element detected 5 Hz red » Internal error
Off » Unit not paired On (green) » Unit paired, voltage output ok Flashes 2 Hz red » Paired but short circuit Flashes 5 Hz red » Internal error
Function
Function
LED Signal transmission Ethernet Color Yellow / red
Off » No mobile unit detected On / yellow » Signal transmission ready 1 Hz yellow » Data packets are being transmitted 3 Hz yellow » 50% of the transmission bandwidth used (10 s) 8 Hz red » Data packets were discarded (in the last 10 s) On / red » Error in data transmission (internal error)
LED Signal transmission Ethernet Color Yellow / red
Off » No mobile unit detected On / yellow » Signal transmission ready 1 Hz yellow » Data packets are being transmitted 3 Hz yellow » 50% of the transmission bandwidth used (10 s) 8 Hz red » Data packets were discarded (in the last 10 s) On / red » Error in data transmission (internal error)
Function
Function
SMW-AUTOBLOK 41
Made with FlippingBook Publishing Software