M OVING THE W ELD S TATION M AIN U NIT
There are various ways to move the Weld Station main unit.
If the Weld Station unit has NOT been uncrated or is still on the pallet, then it can easily be moved by using a fork lift truck. Place the forks under the pallet's main beams and simply lift the unit. Keep in mind, the motor end (top) of the unit is heavier and forks may need to be shifted toward the motor end. If the Weld Station unit has been uncrated, then it can easily be moved by using a fork lift truck. Attach the lifting chains or cables to the fork head ache bar. Attach the other end of the lifting chains or cables to the lifting lugs. The top of the unit can then be lifted using the fork lift truck. Place a wooden '2 x 4 underneath the raised end of the unit. This wood piece will create a gap allowing the forks to be slid under the unit. make sure not to scratch or damage the unit. If the Weld Station unit is uncrated and upright, then the unit can still be moved with a fork lift truck. Place the forks under the unit portion of the main Weld Station unit. Card board or rubber padding can be placed on the forks to prevent scratching of the unit. Make sure the forks are on both side of the light(s) / cables to prevent damaging the lights. Do NOT place the
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 19 of 112
Made with FlippingBook Digital Publishing Software