M OVING THE S ECONDARY B OOTHS
If the secondary or slave booth has NOT been uncrated, then it can easily be moved by using a fork lift truck. Place the forks under the pallet's main beams and simply lift the unit. Make sure to lift the booths from the side of the pallet. If the secondary or slave booth has been uncrated, then the booth can still be moved with a fork lift truck. Place the forks under the bottom of the intake panel of the booth. Card board or rubber padding can be placed on the forks to prevent scratching of the unit. Do NOT place the forks under the lights. Do NOT let the forks enter the intake at the back of the booth.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 25 of 112
Made with FlippingBook Digital Publishing Software