filter rings which support the front two filters.
Slide the second dust tray all the way to the right of the filter compartment.
Slide the first dust tray down to the floor of the catch area beside the first dust tray.
Swing the filter door closed.
Place a 3/8" zinc flat washer on each of the lever handles.
Place the threaded stud of the lever handles through the holes in the filter door arms.
Screw the lever handle into the weld nut and tighten the door down.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 40 of 112
Made with FlippingBook Digital Publishing Software