P OWER S TART / S TOP S WITCH
This switch controls the operation of the motor / blower.
The green “START” button begins the Weld Station operation.
The red “STOP” button stops the Weld Station operation
The center light will illuminate when the “Start” button is depressed. The light will remain illuminated until the “Stop” button is depressed.
The optional remote start / stop switch can be installed to control operation of the motor / blower from a second location. The light on the remote start/stop switch will not illuminate; however, the panel mounted switch will illuminate normally. The unit can be started or stopped from either location. The optional Clean Air Economizer TM switch can be installed to control operation of the motor / blower based on usage. The light on the remote start/stop switch will not illuminate; however, the panel mounted switch will illuminate normally. The unit can be started from either location; however, the unit can only be stopped by pressing the red "STOP" button.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 51 of 112
Made with FlippingBook Digital Publishing Software