M AINTENANCE
C ATCH B ASIN M AINTENANCE
NOTE:
Dust trays are an optional accessory and are not necessary for most operations. If dust trays were purchased, see the "Dust Tray Maintenance" section.
The catch basin is located in the filter compartment below the filters. As the self cleaning cycle is activated, dust will be blown from the filters and accumulate in this retention area. The catch basin should be inspected and cleaned periodically as it will acquire dust and debris and will require being emptied regularly. The waste should disposed of in accordance with local regulations. The inspection and cleaning interval depends on the amount of particulate generated by the specific application. Variables can greatly influence the amount of particulate being deposited on the filters and, in turn, affects the amount of accumulation inside the catch basin. Initially, it is recommended that inspection of this area be performed every four to six weeks on each machine. This will give you an idea of how much particulate is being accumulated and how often it should be cleaned. Most educational facilities empty their catch basins every three months to a year.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 61 of 112
Made with FlippingBook Digital Publishing Software