C-70 PVC, CPVC and ABS Cleaner Clear
This cleaner is formulated to be used with Parabond PVC, CPVC and ABS solvent cement products. Cleaning the pipe and fitting prior to cementing always yields better results. The cleaner should be used to remove dirt, oil, grease and other foreign material from the surface of the pipe and fittings to be cemented. This will insure a clean joint enabling the installer to apply a uniform amount of cement for a strong, tight
joint.Temperature application range is 0° - 110°F. Unlimited Shelf Life
Size
Old Stock Number
New Stock Number
Cans per case
1 quart w/dauber (.946 ml) P0750 1 gallon “F” style (3.785 L) P0751
07050 08036
12
4
P-750 Pipe Joint Lubricant White
A non-toxic, water soluble, pipe lubricant designed for assembly of gasketed pipe. Adheres to wet or dry pipe. Temperature application range is 0 o - 110 o F.
Size
Old Stock Number
New Stock Number
Cans per case
¼ pint w/dauber (.118 ml) ½ pint w/dauber (.237 ml) 1 pint w/dauber (.473 ml)
P0700 P0701 P0702
01005 02005 04005 07009 08010
24 24 12 12
1 quart w/dauber (.946 ml) P0703 1 gallon “F” style (3.785 L) P0704
6
*For further information about working safely with Parabond Solvent Cement, ask for the safety data sheet.
Traps Jointing of traps to waste outlets: 1. Use the washer supplied. Do not over tighten the nut (hand tight plus 1/8 turn). No other jointing compound should be used. 2. All traps are provided with a means of access where required.
Supports The below table shows the recommended maximum centers of support of pipework.
Soil
Waste 0.75m 1.50m
Horizontal
1.00m 2.00m
Vertical
Fix all clips and brackets using rustproofed c/sk screws. Use No. 8’s on waste and overflow system and No. 10’s on soil system.
38.
Made with FlippingBook Annual report