Continue to remove the filter housing
columns until they are all completely
separated.
( Bottom plenum completely separated from
the filter housing columns.)
Now, remove the top door of each column
by applying pressure up and moving the
door back and forth. This will allow you to
later insert fork lift prongs into the top
chamber, and easily move the column.
(Filter columns separated from the bottom
plenum, with the top doors removed.)
Now it is time to cut a hole for the plenum or
duct work, if necessary. Generally the hole
will come pre-cut into the side of the bottom
plenum, but when customers are unsure
about the placement of the unit it can be
sent uncut. This allows the customer to
install the plenum or ductwork hole in the
side of their choosing. To do this, outline the
plenum or ductwork you wish to attach on
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook - Online Brochure Maker