SafeZone Protect30, successfully tested according IWA14- 1/ASTM F2656, consists of barriers, variable angle pieces and gates for pedestrian passing. It is made from high quality S355 steel. Delivers maximum protection and is easy to setup using the QuickLink system.
SafeZone Protect30 Barrier
The TL-4 barrier consists of a four-strand, high-tension cable barrier designed to contain and redirect vehicles away from hazards. The barrier is intended for use on a 4H:1V slope. TL-3 also available. Maximum Dynamic Reflection: 2.7 m Maximum Post Spacing: 6.4 m (21 ft) Contact your local branch for quotes and details.
High-Tension Barrier Permanent Barriers
Guardrail redirect vehicles that would otherwise cross the median or go off the shoulder. The W-beam is used for longer barrier runs, while the thrie beam is used to protect large hazards and bridge decks. Length: 3.81 m (12.5 ft) or 7.62 m (25 ft)
PRODUCT NO.
DESCRIPTION
31121086 32120705
W-Beam Guardrail, 12'6" long, 10 ga. Thrie Beam Straight Rail, 1.905m
W-Beam & Thrie Beam Permanent Barriers
The FLEAT-350 is a flared guardrail end treatment used on the blunt ends of guardrail. These end treatments protect drivers in head-on collisions. On impact, the unit’s head slides down the rail and curls or flattens. Typically only the posts and guardrail will need to be replaced. The flared design places the unit farther from the road, reducing nuisance hits.
PRODUCT NO.
DESCRIPTION
W-Beam End Treatment 37'6" System w/ timber posts and blocks (6'3" spacing) W-Beam End Treatment 37'6" system w/ steel posts and blocks (6'3" spacing)
31120059
Fleat-350 Guardrail End Treatments
31120506
167
ATS Traffic Product Catalogue
atstraffic.ca
Made with FlippingBook interactive PDF creator