Shoring Struts
Pneumatic Strut Features: • Lightweight aluminum alloy construction • Fast and safe installation • Versatile – adapts to all trench types • Environmentally safe – no messy fluids • 7 sizes of standard struts ranging from 18” to 144” • 7 sizes of swivel struts ranging from 21” to 146” • Professional engineer-certified • Positive locking – no chance of creep- back due to loss of pressure
Pneumatic shoring struts are designed and engineered to be one of the safest and most versatile means of shoring an excavation. Made with high tensile-strength aluminum alloy, the struts are lightweight and strong, yet able to withstand the toughest jobsite conditions. Struts are used in conjunction with our multi-shore shoring panels or with contractor-supplied plywood and 2” x 10” plank uprights. Standard and swivel end struts are available to adapt to any trench wall. The standard series has a fixed end for use with near-vertical walled trenches. The swivel series has pivoting ends, which rotate 15 degrees in any direction to accommodate sloped or less uniform trenches. When the strut has been pressurized and the positive locking pin is set, there is no need to keep the air assembly connected. The strut is now fixed mechanically, maintaining pressure against the trench walls. The struts use CO2 or compressed air that makes it environmentally safe. There is no chance of messy fluid leaks or freezing in colder climates.
Our air supply kits provide a quick and portable method of inflating pneumatic shoring struts. They consist of a regulator, 50’ of hose, a self-dumping hand valve, and a quick-connect coupler. An optional air cart is available to accommodate two 20-lbs. CO2 bottles and the hose assembly. This combination makes it a lightweight portable unit that is easy to handle on the jobsite.
185
ATS Traffic Product Catalogue
atstraffic.ca
Made with FlippingBook interactive PDF creator