Lab Product Guide
1
LAB PRODUCT GUIDE
GI-MASK ® Automix Accuracy you can count on Low-viscosity A-silicone gingival mask that offers: • Outstanding thixotropy for direct and indirect techniques • High tear strength for repeated repositioning on the master model • Small mixing tips for less material waste
INDICATIONS: • Implants • Single crowns and bridges • Combination and telescopic work
GI-MASK Automix New Formula
• Allows for accurate reproduction of soft tissue • Provides all information for implant supra-structures and frameworks • Facilitates the preparation of highly esthetic and functional crown and bridge work • Helps prepare ideal conditions for periodontal hygiene
2
LAB PRODUCT GUIDE
GI-MASK Uncompromising function and esthetics
Silicone-based gingival mask for precise reproduction of gingival contours around the margins.
• Maintains accuracy until a restoration is completed • Exclusive accessory system for accurate dispensing, neat mixing, and simple application • Short setting time
Ordering Information GI-MASK Automix
8060
GI-MASK Automix NF Starter Kit
Accessories 6555
2x 50 ml
GI-MASK Automix NF Cartridge
100 pcs
Oral Tips
6900
30 ml
GI-MASK Separator
1 pc
Dispenser 50/75 ml GI-MASK Universal Separator 50 ml
1 pc
Silicone Trimmer
8000
1 pc
12 ea
Small Mixing Tips
8075
1 pc
Silicone Trimmer
12 ea
Oral Tips
60019663
40 pcs
Universal Mixing Tips
8065
GI-MASK Automix NF Refill Kit
2x50 ml
GI-MASK Automix NF Cartridge
12 ea
Small Mixing Tips
12 ea
Oral Tips
GI-MASK Handmix
8030
GI-MASK Starter Kit
150 ml
GI-MASK Base
50 ml
GI-MASK Universal Separator
8037
GI-MASK Refill Pack
2x 50 ml
GI-MASK Base
12x 18ml
GI-MASK Activator
8036
GI-MASK Activator
18 ml
Activator
3
LAB PRODUCT GUIDE
Lab-Putty & Lab-Putty Hard Optimal performance and end hardness
• Easy dosing • Unique activator provides flexible working time • Ideal end hardness and excellent elasticity allows for easy removal • Outstanding dimensional stability • High heat resistance
End hardness in Shore A
Dimension Stability
Heat resistance in°C / F
Product
Mixing Time
Working Time
Setting Time
1 hour - 0.08 1 day - 0.16
Lab-Putty
30 - 45 secs
90 secs
5 - 7 mins
63-70
100°C / 230°F
1 hour - 0.04 1 day - 0.13
Lab-Putty Hard
45 secs
2 mins
15 mins
90
300°C / 570°F
4
LAB PRODUCT GUIDE
Indications
Lab-Putty
Lab-Putty Hard
Matrix for the formation of general occlusion & functional patterns
Model for repairs
Soldering
Isolation / denture heat protections
Hard palate relief stamps
Key for gingival mask
Block outs
Matrix to build partial and full dentures
Relinings
Ordering Information
8805
Lab-Putty 1.35 kg
8882
Lab-Putty Hard 1.8 kg
900 ml
Lab-Putty Base
900 ml
Lab-Putty Hard Base
40 ml
Activator
1 pc
Dosing Spoon
1 pc
Dosing Spoon
8880
Lab-Putty 5 kg
8815
Lab-Putty 7.5 kg
5000 ml
Lab-Putty Hard Base
5000 ml
Lab-Putty Base
5 pcs
Dosing Spoon
5 pcs
Dosing Spoon
8840
Lab-Putty / Lab-Putty Hard
40 ml
Activator
C8850 Lab-Putty / Lab Putty Hard - Economy 6x 40 ml Activator
5
LAB PRODUCT GUIDE
PINDEX ® The pinnacle of precision in model and die fabrication
The benchmark for modern model making, the PINDEX System makes it fast and easy to achieve parallel drill channels – for accurate, reliable pin placement.
• Laser drilling machine delivers highly accurate positioning for better die registration • High-visibility beam reduces eye fatigue • Focus-free laser outlasts conventional bulbs
• Manual drilling to pre-set depth • Durable, high quality carbide drill
6
LAB PRODUCT GUIDE
Ordering Information
PX200 Pindex Handsaw System 1 pc Pindex Handsaw 12 pcs Sawblades 0.18 mm 12 pcs Sawblades 0.25 mm
PX113L Pindex Laser System ( USA/Canada/ Mexico) 1 pc Hand Drill 1 pc Flexible Socket Former Set 2 pcs Drill Charging Tools 1 pc Socket wrench 1 pc Pin Instruction Set
P38
Proxima Sawblades
12 pcs
Refill Package
Bulk Pins PX112S
Sawbladees 0.18 mm PX201 12 pcs
1,000 pcs Pin Medium (16mm) with Split Sleeve
Refill Package
PX115
1,000 pcs Pin Short (10mm) with Plastic Sleeve
PX301
100 pcs Refill Package
PX117
100 pcs Pin Short (10mm) with Plastic Sleeve
Sawblades 0.25 mm PX202 12 pcs
Accessories PX119
Refill Package
3 pcs
Carbide Drill
PX302
100 pcs Refill Package
PX120
1 pc
Reamer
PX125
1 pc
Laser Retro-Fit Kit (Mark II)
Flexible Rubber Baser Molds PX147 1 pc
Whole Mandible
7
LAB PRODUCT GUIDE
HYGENIC ® Waxes Small details, big impact
Broad portfolio of sizes and shapes for various indications: Bite-wafers, u-shaped occlusal rim wax, square wax ropes, round wax strips, and wax sticks, which can be used for undercuts of individual trays, bite registration, and bite plane appliances.
HYGENIC Bite-Wafers
Designed for fast bite registration. Thin aluminum foil within two wax layers. U-shaped.
Min. Melting Point
Max Melting Point
P/N
Type
Length (in) Width (in)
Contents
H00825 Blue Lamin Bite Wafers
2 +/-1/4
1 3/4 +-1/4 170°F/77°C 182°F/83°C
24 pcs
H00839 Yellow Lemon Bite Wafers
2 +/-1/4
2 +-1/4
170°F/77°C 182°F/83°C
50 pcs
HYGENIC Boxing Wax
Designed for boxing impressions. Withstands extreme heat given off by dental stone during setting.
Min. Melting Point
Max Melting Point
P/N
Type
Length (in) Width (in)
Contents
H00815 Boxing Wax, Regular, Red
12 +1/8,-1/4
1.5 +/-1/16
170°F/77°C 182°F/83°C 1lb / 450g Box
H00837 Boxing Wax, Regular, Red
12 +1/8,-1/4
1.5 +/-1/16
170°F/77°C 182°F/83°C 5lb / 2.25g Box
HYGENIC Medium-Soft no.3 Pink/Red Wax
Designed for soft modeling. Softens and cools easily to minimize shrinkage.
Min. Melting Point
Max Melting Point
P/N
Type
Length (in)
Width (in)
Contents
H00806 Medium Soft, #3 Pink Wax
5 3/4 +1/8,-3/8
2 7/8 +/-1/8
165°F/74°C
182°F/83°C
1lb / 450g Box
H00812 Medium Soft, #3 Pink Wax
5 3/4 +1/8,-3/8
2 7/8 +/-1/8
165°F/74°C
182°F/83°C 5lb / 2.25g Box
8
LAB PRODUCT GUIDE
HYGENIC Waxes
HYGENIC U-Shaped Occlusal Rim Wax
Recessed base adapts to base plate. Can be reshaped at room temperature to fit individual arch and warmed in water if too rigid.
Min. Melting Point
Max Melting Point
P/N
Type
Lengh (in)
Width (in)
Contents
H00822 U-Shaped Occlusal Rim Wax
2 +/-1/4
2 +/-1/4
170°F/77°C 182°F/83°C 100 pcs
HYGENIC Orthodontic Tray Wax Sticky, soft, and narrow wax ropes compatible with virtually any impression material. Can be adapted without heating. For peripheral lining of trays, increasing tray height, post damming, etc.
Min. Melting Point
Max Melting Point
P/N
Type
Length (in) Width (in)
Contents
H00827 Orthodontic Tray Wax, White
6 +1/8,-1/4
3 +1/8,-1/4
170°F/77°C 182°F/83°C
48 pcs
HYGENIC Round Utility Wax Strips
For preserving the periphery roll, post damming, and extending and building up impression trays.
Melting Point Min
Melting Point Max
P/N
Type
Length (in) Width (in)
Contents
H00817 Round Wax Strips, Red
11 +1/4,-3/4
1.5 +/-1/16
170°F/77°C 182°F/83°C
80 pcs
H00818 Round Wax Strips, White
11 +1/4,-3/4
1.5 +/-1/16
170°F/77°C 182°F/83°C
80 pcs
9
LAB PRODUCT GUIDE
HYGENIC Waxes
HYGENIC Square Wax Ropes
Sticky, soft, and narrow wax ropes. Allows for a larger border area during boxing procedures.
Melting Point Min
Melting Point Max
P/N
Type
Lengh (in)
Width (in)
Contents
H00819 Square Wax Strips, Red
11 +1/4,-3/4
170°F/77°C
182°F/83°C
80 pcs
H00820 Square Wax Strips, White
11 +1/4,-3/4
170°F/77°C
182°F/83°C
80 pcs
HYGENIC Wax Sticks
Can be formed without heating and adheres readily to hydrocolloid materials. Softer and tackier than utility and beading waxes to minimize tissue displacement.
Melting Point Min
Melting Point Max
P/N
Type
Lengh (in)
Width (in)
Contents
H00826 Wax Sticks, Light Green, Scented
6 +1/8,-1/4
3 +1/8,-1/4 170°F/77°C
182°F/83°C
48 pcs
HYGENIC Extra Tough Wax
Durable, all-purpose wax made from a special blend of waxes. Pliable and tacky to hold to teeth effectively. Takes polish and boils out.
Melting Point Min
Melting Point Max
P/N
Type
Lengh (in)
Width (in)
Contents
H00803 Square Wax Strips, Red
5 3/4 +1/8,-3/8 2 7/8 +/-1/8 165°F/74°C 182°F/83°C 1lb / 450g Box
H00809 Square Wax Strips, White
5 3/4 +1/8,-3/8 2 7/8 +/-1/8 165°F/74°C 182°F/83°C 5lb / 2.25kg Box
10
LAB PRODUCT GUIDE
ACCU-TRAC ® Laboratory model making, made easy
Save time and material without sacrificing precision. With the ACCU-TRAC System, the model and base are poured as one, eliminating additional steps when using pins and sleeves.
• Universal tray accommodates all maxillary and mandibular sizes/quadrants • Low base height allows model to fit any articulator • One-pour technique saves time and materials • Reusable components for improved economics • Numerical die location, immediate die recognition, and easy die repositioning
Ordering Information
AT6
Introductory Kit
Accessories ATA20
6 pcs
ACCU-TRAC Precision Die Trays
20 pcs
Locking Arms
ATE12
6 pcs
Pouring/Ejector Bases
12 pcs
Model Ejectors (Pouring/Ejector Bases)
ATK25
6 pcs
Articulation Spacers
25 pcs
Articulation Keepers
ATS20
25 pcs
Articulation Keepers
20 pcs
Articulation Spacers
25 pcs
Return Request Cards
25 pcs
Patient Identification Labels
AT12
Refill Kit
12 pcs
ACCU-TRAC Precision Die Trays
50 pcs
Articulation Keepers
50 pcs
Return Request Cards
50 pcs
Patient Identification Labels
ATT576 Bulk-Kit - Economy Packaging 576 pcs ACCU-TRAC Precision Die Trays
ATN50 ACCU-TRAC Transport System 50 pcs Disposable Carrying Cases 50 pcs Plastic Retainers 50 pcs Identification Labels
11
LAB PRODUCT GUIDE
PRESIDENT Impression Trays Flawless impressions await
Patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. Anatomical form simplifies fitting. Autoclavable and non-autoclavable.
PRESIDENT Impression Tray (transparent) C6901 12 pcs
C6906
Size 1 Upper Arch Large
12 pcs
Size 6 Lower Arch Small
C6902
C6907
12 pcs
Size 2 Lower Arch - Large
12 pcs
Size 7 Upper Left / Lower Right Quadrant
C6903
C6908
12 pcs
Size 3 Upper Arch Medium
12 pcs
Size 8 Upper Right / Lower Right Quadrant
C6904
C6909
12 pcs
Size 4 Lower Arch Medium
12 pcs
Size 9 Anterior Universal
C6905
C6910
12 pcs
Size 5 Upper Arch Small
9 pcs
Assortment Pack - Sizes 1-9 (1 ea)
PRESIDENT Impression Tray C6950 12 pcs
C6955
Size 1 Upper Arch Large AC
12 pcs
Size 6 Lower Arch Small AC
C6951
C6956
12 pcs
Size 2 Lower Arch - Large AC
12 pcs
Size 7 Upper Left / Lower Right Quadrant
C6952
C6957
12 pcs
Size 3 Upper Arch Medium AC
12 pcs
Size 8 Upper Right / Lower Right Quadrant
C6953
C6958
12 pcs
Size 4 Lower Arch Medium AC
12 pcs
Size 9 Anterior Universal
C6954
C6959
12 pcs
Size 5 Upper Arch Small AC
9 pcs
Assortment Pack - Sizes 1-9 (1 ea)
Accesories H00563
H00685
1 pc
Mixing Bowl Small
1 pc
1/4 x 3/32 Amber
H00564
H00688
1 pc
Mixing Bowl Medium
1 pc
1/4 x 1/8 x 50 ft Amber Tube
H00565
H00697
1 pc
Mixing Bowl Large
1 pc
5/16 x 3/32 x 50 ft Amber Tube
H00566
H00757
1 pc
Mixing Bowl Extra Large
1 pc
Saliva Eject Basket screen A238
H00567
H06012
1 pc
Mixing Bowl Jumbo
3 pcs
Spatula
100 ft Clean-Flex 1/2 HVE Tubing, Platinum Gray
H00678
H06541
1 pc
3/16 x 3/32 x 50 ft Amber Tube
1 pc
H00682
8075
1 pc
1/4 x 1/16 x 50 ft Amber Tube
1 pc
Trimmer for Silicones
H00684
1 pc
1/4 x 1/16 x 50 ft Black Tube
For more information visit coltene.com
Coltène/Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, Ohio 44223 / USA
Dent4You AG Bahnhofstrasse 2 CH-9435 Heerbrugg
Coltène/Whaledent GmbH + Co. KG Raiffeisenstraße 30 DE-89129 Langenau
©2026 Coltène/Whaledent Inc.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12Made with FlippingBook - professional solution for displaying marketing and sales documents online