TROLLEYS & CLAMPS Push and Geared Girder Trolleys Features
Push Girder Trolleys Complies to AS1418.2.
Orange in colour
522005S 522010S 522015S
Capacity WLL (t)
Beam Width (mm) 50-152
64 - 203 74 - 203 88 - 203 100 - 305
114 - 305
124 - 305
136 - 305
Note: Contact your local Robertsons branch for full dimensions.
• Each Girder Trolley has an individual serial number stamped on the stainless steel identification plate. This number coincides directly to the test certificate of the product, for quick and easy tracing and reference • Every Girder Trolley is operationally tested to 150% of its rated capacity and comes with a test certificate • Spare trolley wheels are available, complete with full repair facilities and re-testing to NATA specifications.
• Independent hanging eye for easy attachment of chain blocks • Precision ball bearing trolley wheels complete with dust cover and circlip • Lightweight robust all-steel construction • Anti-derailment end plates fitted as standard for added safety • Anti-tilt blocks fitted as standard for additional safety • Hand chain on geared trolleys has a special, corrosion resistant Zinc dichromate (gold) finish
• Our Push and Geared Girder Trolleys are colour coded for safer lifting capacity recognition • Colour coded to International Lifting Standards • Designed to run on either R.S.J. or Universal Beams • Fully adjustable to suit varying flange widths up to a maximum of 350mm with the simple addition or subtraction of spacers or nuts on a suspension pin • Easy and simple mounting in different locations
Push and Geared Girder Trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user.
18 | EMAIL email@example.com | bunzlsafety.com.au | CALL 1300 977 577
CALL 1300 977 577 | bunzlsafety.com.au | EMAIL firstname.lastname@example.org | 19
Made with FlippingBook flipbook maker