S TART / S TOP S WITCH
This switch controls the operation of the motor / blower.
The green “START” button begins the Weld Station operation.
The red “STOP” button stops the Weld Station operation
The center light will illuminate when the Safety interlock is activated using the single push buttons.
I NTERLOCK A CTIVATE
The safety circuit is set up so that the drive will not activate without the internal interlock being activated. The Interlock Activate button releases drive interlock and allows the drive to operate.
The interlock resets on power loss and must be reactivated when power is reconnected.
Interlock status is displayed on the controller display.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 52 of 137
Made with FlippingBook Annual report maker