C ENTRAL HMI C ONTROLLER
On the upper right of every screen is the current date and time in the format: YY-MM-DD hh:mm:ss DAY
The Date and Time is set to Eastern Standard Time.
The screen is a touch screen Human Machine Interface (HMI). Gently touch the screen to activate buttons and switches on the screen.
Only one point on the screen can be activated at a time. If one point is touched and contact remains made while a second point is touched, the second point will not register on the HMI.
Due to the number of units connected to the system, there may be some lag time for actions performed on the HMI. Please be patient and allow the actions to resolve completely.
At the bottom of every screen is a navigation bar. This bar does not change from screen to screen. Pressing the buttons at the bottom of the screen will take you to the respective screens as shown below.
The setup screen is used only for the factory equipment set up. This screen is locked out using a password and only accessible by a Clean Air America employee.
The Option and Manual screens are locked using a different username and password. These screens can be accessed using the following (Case Sensitive):
Username:
MAIN
Password:
CAA
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 57 of 137
Made with FlippingBook Annual report maker