The Reset buttons used to reset and clear the graph. The graph cannot be reset instantaneously. When the button is pressed, it will begin to blink. Once it is blinking, it must be pressed a second time for the reset to take effect. If the button is not pressed, the blinking will cease and will not reset; the reset procedure must then be restarted.
The Plot Point shows what the number of data the unit data log is on. This can be useful for unit diagnostics should a fault occur.
The Time Stamp is the time attached to the data at the Plot Point . This means by using the graphs forward and back buttons, the user can navigate to a point on the graph and read the time stamp of when this event occurred.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 68 of 137
Made with FlippingBook Annual report maker