be pressed a second time for the reset to take effect. If the button is not pressed, the blinking will cease and will not reset; the reset procedure must then be restarted.
The Plot Point shows what the number of data the unit data log is on. This can be useful for unit diagnostics should a fault occur.
The Time Stamp is the time attached to the data at the Plot Point . This means by using the graphs forward and back buttons, the user can navigate to a point on the graph and read the time stamp of when this event occurred.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 70 of 137
Made with FlippingBook Annual report maker