The Start Button is used to start the manual pulsing sequence if the number of cycles is more than '0'. The Pulsing Indicator is a RED indicator light that illuminates when the unit is pulsing. This will illuminate when both the manual pulsing sequence is are activated as well as the automatic pulsing sequences.
To change the value, use the Increment Up and Increment Down buttons to change the setting by 1 cycles. By touching the Number of Cycles numerical display, a keypad will appear on the screen which can be used to enter the number directly. The Number of Cycles numerical display shows how many cycles the unit is set to run. This can be increased or decreased even while the pulsing sequence is active as shown using the Pulsing Indicator . This numerical display will also show the number of shut down cycles during the Shutdown Cleaning sequence and '1' cycle during the Running Cleaning Cycles.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 80 of 137
Made with FlippingBook Annual report maker